Do you have questions? Our community may have already answered them!
Connect with others in our support forum.
Kinco frequency inverter KC200 three-phase 400 V AC (1.5–45 kW)
- Modbus RTU & CANopen
- Vector control with/without encoder
- 6 DI, 2 AI, 2 AO, 2 relays
- Integrated brake chopper
- 150 % for 60 s, 180 % for 3 s
€242.50*
In stock
Lieferzeit: 3 bis 5 Tage
Accessories
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available in 1 day, delivery time 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Alternatives
previously €324.00 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Customers also bought
Customers also bought
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Customers also viewed
Customers also viewed
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
If you need a frequency inverter for pumps, fans, conveyors or hoists with more I/O, CANopen and optional speed feedback, the Kinco KC200 is a universal vector inverter from 1.5 to 45 kW for three-phase 400 V. Modbus RTU and CANopen come as standard on every model — for compact standard drives up to 5.5 kW, the smaller Kinco KC100 is available.
🏭 Typical Applications
Pumps, fans and HVAC: The integrated PID controller works with two analog inputs — setpoint and actual value at the same time, without an external controller. AVR voltage regulation keeps the output voltage constant when the mains fluctuates.
Hoists, agitators and heavy starts: 150 % rated current for 60 s and 180 % for 3 s, sensorless 150 % rated torque already at 0.5 Hz. With the KC200-UVWPG encoder card, this becomes closed-loop vector control with 200 % torque at 0 Hz. The brake chopper is built in up to 45 kW.
Networked machines: Modbus RTU and CANopen without an add-on card. According to Kinco, up to 32 inverters can run in a master-slave group via Modbus or CAN.
Brand change in existing plants: According to Kinco, the parameter addresses of the old inverter in the PLC software can be mapped to the KC200 — which makes switching brand or series easier.
⚙️ Control and Functions
Three control modes: V/f control (linear, user-defined, V/f separation), sensorless vector control SVC (speed range 1:100, ±0.5 %) and, with encoder card, closed-loop vector control FVC (1:1000).
Output frequency up to 599 Hz, carrier frequency up to 12 kHz, frequency resolution 0.01 Hz.
Ramps: linear or S-curve, four sets of acceleration/deceleration times.
Frequency setpoint via keypad, digital potentiometer, analog input, pulse input, Modbus/CANopen, PID or up to 16 preset speeds — main and auxiliary frequency can be combined.
Autotuning of motor parameters, two-motor operation with alternating control of two motors.
Power-loss ride-through: During a short voltage dip, the motor feeds energy back and the inverter keeps running.
Fewer nuisance trips: overcurrent and overvoltage stall control, wave-by-wave current limiting on load surges, temperature-dependent carrier frequency reduction.
🔌 Connections and Control I/O
6 digital inputs (DI1–DI6): NPN/PNP, DI6 also usable as pulse input up to 100 kHz.
2 analog inputs (AI1, AI2): each 0–10 V or 0–20 mA via jumper, 12 bit.
2 analog outputs (AO1, AO2): 0–10 V or 0/4–20 mA.
2 transistor outputs (DO1, DO2): 30 V / 50 mA, DO2 also as pulse output up to 100 kHz.
2 relay outputs: changeover contacts, 250 V AC / 3 A or 30 V DC / 1 A.
RS-485 (Modbus RTU) and CAN (CANopen) as terminals.
Port for external keypad with parameter copy between devices.
⚠️ Before Ordering
No integrated EMC filter: Operation according to EN 61800-3 requires an external mains filter (Kinco filters meet category C2). Matching filters for each power rating are available separately.
External brake resistor: The brake chopper is built in; the resistor is connected to ⊕/PB.
Mounting clearances: at least 100 mm above and below, 50 mm at the sides.
🔧 Frame Sizes, Environment and Mounting
1.5–3.7 kW: 126 × 186 × 167 mm, approx. 2 kg
5.5–11 kW: 146 × 256 × 181 mm, approx. 6 kg
15–22 kW: 170 × 320 × 207 mm, approx. 8 kg
30–45 kW: 225 × 360 × 234 mm, approx. 9 kg
IP20, wall mounting. Operation −10 °C to +40 °C, up to +50 °C with derating; storage −20 °C to +60 °C; above 1000 m, 1 % derating per 100 m.
🏷️ Manufacturer and Reliability
Kinco Automation (founded 1996, listed in Shanghai) develops frequency inverters, servo and control technology for customers in more than 70 countries. The KC200 carries the CE mark (Low Voltage, EMC and RoHS Directives). Kinco frequency inverters are in productive use at numerous spstiger customers in Germany — with support in German directly from us.
Technical Specifications
Login
13 October 2025 10:21
Alles I.O.
Preis/Leistung Top!