Accessories for your automation projects
Signal isolator / signal converter SUP-602S - 4 - 20 mA to 0 - 10 V
Signal isolator / signal converter from Supmea SUP-602S for signal isolation / conversion of a 4 - 20 mA standard signal to 0 - 10V.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: Eingang 4 - 20 mA
- Product Benefits 2: Ausgang 0 - 10 V
Tip
INVT braking resistor Applicable for inverters
INVT braking resistor: Suitable for INVT frequency inverters. The INVT frequency inverters have built-in brake choppers to which these resistors can be connected in order to dissipate energy from the braking of the motor.Use braking resistors if the load has a high moment of inertia and the frequency inverter goes into the fault state during braking (deceleration).
- Min. 1 Variant available.
INVT Zubehör Netzfilter Anwendbar für Wechselrichter
Kontrollieren Sie die vom Wechselrichter erzeugten elektromagnetischen Störungen, installieren Sie ihn in der Nähe der Eingangsklemmen oder Ausgangsklemmen des Wechselrichters.
- Min. 1 Variant available.
Langir LED push-button L22M M22 with short operating distance and ring LED
Robust LED push-button with short stroke. Thanks to the short stroke, operators are less fatigued, but it is also easier for them to trigger the button unintentionally. This push-button is therefore very suitable for selection applications, for example for program selection. With a maximum switching capacity of 50 mA at 24 VDC, the switch is well suited for use on PLC inputs or on a coupling relay .
- Available
- Delivery Time : 3 bis 5 Tage
Langir LED push-button L22U M22 ultra-short with ring LED
Ultra-short flat LED push-button in size M22 from Langir. With an installation depth of only around 12 mm, this push-button can be installed in very flat housings. With a maximum switching capacity of 50 mA at 24 V DC, this push-button is suitable for PLC inputs and coupling relays.
- Available
- Delivery Time : 3 bis 5 Tage
Langir push-button V22 M22 vandal-proof
Langir stainless steel push-buttons in various designs.
- Available
- Delivery Time : 3 bis 5 Tage
Langir LED push-button L22A M22 with LED ring
Robust LED push-button in size M22 with LED ring in various colors. The push-button can switch up to 5 A at 230 V AC and is also suitable for operation on a PLC input or coupling relay.The power supply for the LED is 24 V DC and is well suited for PLC transistor outputs. The ring LED lights up regardless of the switching status of the push-button.
- Available
- Delivery Time : 3 bis 5 Tage
Langir signaling device (buzzer) LF19 M19 with flashing LED ring
A signal transmitter (buzzer) with flashing LED ring. You can easily connect the signal transmitter to a 24 V DC PLC output to output errors or warnings. The buzzer is available with yellow and red LEDs with slightly different signal frequencies.
- Available
- Delivery Time : 3 bis 5 Tage
Radio clock receiver (DCF77) for SPS as kit
Radio clock receiver (DCF77) for synchronizing real-time clocks in the PLC with the time signal24 VDC pulses transmit the time signal and can be easily connected to a 24 VDC signal input of a PLC.Supplied with: DCF receiver and circuit board for signal transmission to PLC (24 VDC)A ready-to-use program for synchronizing the real-time clock of the Thinget PLC with the time signal is available free of charge as a download here:
- Available
- Delivery Time : 1-2 weeks
Langir LED push-button L22T M22 with LED switch-on symbol vandal-proof
Langir LED push-button
L22T
M22 with LED switch-on symbol vandalism-protected
- Available
- Delivery Time : 3 bis 5 Tage
Langir LED push-button M22 CP22 Capacitive changeover switch with LED ring
Langir LED push-button M22 CP22 Capacitive changeover switch with LED ring
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
Langir push-button L22U M22 ultra-short vandalism-protected
Ultra-short push-button flat in size M22 from Langir. With an installation depth of only around 12 mm, this push-button can be installed in very flat housings.
- Available
- Delivery Time : 3 bis 5 Tage