For anyone looking to equip a machine or system with both a user interface and control logic without wiring two separate devices (HMI and PLC), the Kinco MK070E-33DT offers a compact all-in-one solution: controller and 7" touch panel in a single housing, configured together and factory-matched to each other. This saves space in the control cabinet, simplifies commissioning and reduces potential failure points compared to separate systems. 🏭 Typical Applications Simple to mid-range machine control: Conveyor systems, mixing machines, packaging lines or test stands – wherever control logic and operator interface need to share the same device and space in the control cabinet is limited. Retrofit projects: Replace legacy PLC systems without sourcing an additional external HMI. The MK device handles both and communicates via Modbus RTU with existing drives, sensors and peripherals. OEM machine builders with IoT requirements: The built-in Kinco IoT client enables remote download and VNC remote access without additional hardware – useful for service engineers maintaining machines at customer sites remotely. Expandable small controllers: Connect up to 8 KS expansion modules (digital, analog, temperature) via the integrated CAN bus when the on-board I/O is not sufficient. 🖥️ Display and Touch 7" TFT display, 800 × 480 pixels, 256K colors – sufficient resolution for clear process visualizations, trend curves and alarm screens. LED backlight with 50,000 hours lifespan (approx. 5.7 years continuous operation). HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2 – adequate reserve for complex project files and recipe data. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments The MK070E-33DT features a 4-wire resistive touchscreen. Operation works reliably even with safety gloves or slightly wet fingers – no capacitive sensor that depends on skin conductivity. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45): HMI configuration over the network, remote access via KDManager. Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2, DB9): Port1 supports Modbus RTU master/slave, programming and free communication. Port2 supports Modbus RTU and free communication – ideal for a second fieldbus segment (e.g. drive on Port1, barcode scanner on Port2). Max. 115,200 bps, up to 32 nodes per channel. CAN bus (DB9): Connect up to 8 KS expansion modules (digital I/O, analog I/O, temperature). USB host (Type-A): USB flash drive, keyboard or mouse. USB slave (USB-B): Program download from PC via KincoBuilder / KincoDTools. 🌐 IoT and Remote Access For anyone who needs to maintain machines at customer sites without traveling on-site, the built-in Kinco IoT client provides remote download of new HMI projects, transparent PLC access (Kinco Transparent PLC) for diagnostics and parameter changes, and VNC monitoring of operator screens – all without additional routers or gateway hardware. 💡 Requirements: network connection for the device and a Kinco IoT account (free). Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools The MK device is configured using two free software tools: KincoBuilder (PLC programming, IEC 61131-3): Supports Ladder Diagram (LD) and Instruction List (IL). Includes a motion control wizard for positioning tasks, HSC wizard (high-speed counters, 4 × up to 50 kHz) and an offline simulator with single-step execution and breakpoints. Free download at en.kinco.cn. KincoDTools (HMI configuration): Same platform as the Kinco M2 series and the classic Kinco Green Series (V1). Supports offline simulation, macros (C language) and up to 32,768 screens. 💡 Note for Modbus users: The MK communicates via Port1 as Modbus RTU master with Kinco drives (KC100, KC200, GD28 and others) as well as drives from other manufacturers – provided they support Modbus RTU slave. 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience developing HMI, PLC and drive technology for the global industrial market. The MK070E-33DT is CE certified and carries the RoHS and EAC markings. EMC requirements for industrial use in Europe are met (IEC 61131-2). Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout dimensions 192 × 138 mm, mounting depth 34 mm. Horizontal and vertical installation supported (configurable in KincoDTools). Mounted with 4 included mounting clips; recommended torque 0.5 N·m. Overall dimensions: 204 × 150 × 34 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W. Scope of delivery: MK070E-33DT, 4 × mounting clips with screws, detachable terminal blocks pre-installed.

For anyone looking for a compact all-in-one solution for simple to mid-range machine control, the Kinco MK043E-20DT combines a 4.3" touch panel and PLC controller in a single housing. Particularly suited for applications where the panel cutout is restricted and a 7" display would be unnecessarily large – without making significant compromises on I/O capacity or connectivity. 🏭 Typical Applications Small machines and compact systems: Conveyors, dosing systems, mixing stations or refrigeration units with limited cabinet space – the MK043E-20DT fits controller and operator panel into a 119 × 93 mm panel cutout. Retrofit and replacement: Replace legacy controllers with separate operator panels using a single compact unit. The device communicates via Modbus RTU with existing drives, sensors and actuators. Expandable solutions: Connect up to 8 KS expansion modules via CAN bus when 9 DI + 9 DO + 2 AI is not enough. 🖥️ Display and Touch 4.3" TFT display, 480 × 272 pixels, 256K colors – sufficient for simple process displays, setpoint entry and status messages. LED backlight with 50,000 hours lifespan. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments Like all MK devices, the MK043E-20DT uses a 4-wire resistive touchscreen. Operation with safety gloves or slightly wet fingers is straightforward. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45) – network download and remote access via KDManager. 2 × RS485 (Port1 + Port2) – Modbus RTU master/slave, programming, free communication. Max. 115,200 bps. CAN bus – up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-B). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Motion control and HSC wizard (4 × HSC up to 50 kHz), offline simulator. Free download at en.kinco.cn. KincoDTools – HMI configuration, same platform as the Kinco F2 HMI series. 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience developing HMI, PLC and drive technology for the global industrial market. The MK043E-20DT is CE certified and carries the RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout dimensions 119 × 93 mm, mounting depth 32 mm. Overall dimensions: 132 × 102 × 32 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

💡 This version is supplied with a neutral front panel without Kinco branding – ideal for OEM applications under your own brand name. For anyone who needs maximum I/O flexibility in a compact 4.3" all-in-one, the Kinco MK043E-27DT is the most versatile variant of the MK043 series: 4 bidirectional DIO channels freely configurable as DI or DO by wiring alone, a USB-C programming port (standard phone data cable sufficient) and an additional RS232 port on the front panel – alongside 10 DI, 10 DO, 2 AI, 1 AO and full Ethernet/IoT connectivity. 🏭 Typical Applications Flexible I/O applications: Use the 4 DIO channels as additional inputs or outputs depending on the application – no software reconfiguration, just rewire. Ideal for machines with varying sensor/actuator configurations. Applications requiring RS232: Connect legacy devices, barcode readers or serial printers directly via the front-mounted RS232 port (COM2) – without occupying the RS485 ports. Mobile commissioning: USB-C port on the front accepts standard phone data cables – no special programming cable required for PLC and HMI downloads. 🖥️ Display and Touch 4.3" TFT display, 480 × 272 pixels, 256K colors. LED backlight 50,000 hours. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments 4-wire resistive touchscreen. Operation with safety gloves or slightly wet fingers is straightforward. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45). Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2) + RS232 (COM2, front panel). Modbus RTU master/slave on Port1. Max. 115,200 bps. CAN bus: Up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-C). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Motion control and HSC wizard. Free download at en.kinco.cn. KincoDTools – HMI configuration. 🏷️ Manufacturer and Reliability The MK043E-27DT is CE certified and carries the RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout 119 × 93 mm, mounting depth 45.42 mm. Scope of delivery: MK043E-27DT-Blank (neutral front panel), 4 × mounting clips with screws, detachable terminal blocks pre-installed. ⚠️ Note: The MK043E-27DT is 14 mm deeper than other MK043 models – verify available installation depth before ordering. Overall dimensions: 132 × 102 × 45.42 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

💡 This version is supplied with a neutral front panel without Kinco branding – ideal for OEM applications under your own brand name. For anyone looking to equip a machine or system with both a user interface and control logic without wiring two separate devices (HMI and PLC), the Kinco MK070E-33DT offers a compact all-in-one solution: controller and 7" touch panel in a single housing, configured together and factory-matched to each other. This saves space in the control cabinet, simplifies commissioning and reduces potential failure points compared to separate systems. 🏭 Typical Applications Simple to mid-range machine control: Conveyor systems, mixing machines, packaging lines or test stands – wherever control logic and operator interface need to share the same device and space in the control cabinet is limited. Retrofit projects: Replace legacy PLC systems without sourcing an additional external HMI. The MK device handles both and communicates via Modbus RTU with existing drives, sensors and peripherals. OEM machine builders with IoT requirements: The built-in Kinco IoT client enables remote download and VNC remote access without additional hardware – useful for service engineers maintaining machines at customer sites remotely. Expandable small controllers: Connect up to 8 KS expansion modules (digital, analog, temperature) via the integrated CAN bus when the on-board I/O is not sufficient. 🖥️ Display and Touch 7" TFT display, 800 × 480 pixels, 256K colors – sufficient resolution for clear process visualizations, trend curves and alarm screens. LED backlight with 50,000 hours lifespan (approx. 5.7 years continuous operation). HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2 – adequate reserve for complex project files and recipe data. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments The MK070E-33DT features a 4-wire resistive touchscreen. Operation works reliably even with safety gloves or slightly wet fingers – no capacitive sensor that depends on skin conductivity. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45): HMI configuration over the network, remote access via KDManager. Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2, DB9): Port1 supports Modbus RTU master/slave, programming and free communication. Port2 supports Modbus RTU and free communication – ideal for a second fieldbus segment (e.g. drive on Port1, barcode scanner on Port2). Max. 115,200 bps, up to 32 nodes per channel. CAN bus (DB9): Connect up to 8 KS expansion modules (digital I/O, analog I/O, temperature). USB host (Type-A): USB flash drive, keyboard or mouse. USB slave (USB-B): Program download from PC via KincoBuilder / KincoDTools. 🌐 IoT and Remote Access For anyone who needs to maintain machines at customer sites without traveling on-site, the built-in Kinco IoT client provides remote download of new HMI projects, transparent PLC access (Kinco Transparent PLC) for diagnostics and parameter changes, and VNC monitoring of operator screens – all without additional routers or gateway hardware. 💡 Requirements: network connection for the device and a Kinco IoT account (free). Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools The MK device is configured using two free software tools: KincoBuilder (PLC programming, IEC 61131-3): Supports Ladder Diagram (LD) and Instruction List (IL). Includes a motion control wizard for positioning tasks, HSC wizard (high-speed counters, 4 × up to 50 kHz) and an offline simulator with single-step execution and breakpoints. Free download at en.kinco.cn. KincoDTools (HMI configuration): Same platform as the Kinco M2 series and the classic Kinco Green Series (V1). Supports offline simulation, macros (C language) and up to 32,768 screens. 💡 Note for Modbus users: The MK communicates via Port1 as Modbus RTU master with Kinco drives (KC100, KC200, GD28 and others) as well as drives from other manufacturers – provided they support Modbus RTU slave. 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience developing HMI, PLC and drive technology for the global industrial market. The MK070E-33DT is CE certified and carries the RoHS and EAC markings. EMC requirements for industrial use in Europe are met (IEC 61131-2). Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout dimensions 192 × 138 mm, mounting depth 34 mm. Horizontal and vertical installation supported (configurable in KincoDTools). Mounted with 4 included mounting clips; recommended torque 0.5 N·m. Overall dimensions: 204 × 150 × 34 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W. Scope of delivery: MK070E-33DT-Blank (neutral front panel), 4 × mounting clips with screws, detachable terminal blocks pre-installed.

For anyone who needs maximum I/O flexibility in a compact 4.3" all-in-one, the Kinco MK043E-27DT is the most versatile variant of the MK043 series: 4 bidirectional DIO channels freely configurable as DI or DO by wiring alone, a USB-C programming port (standard phone data cable sufficient) and an additional RS232 port on the front panel – alongside 10 DI, 10 DO, 2 AI, 1 AO and full Ethernet/IoT connectivity. 🏭 Typical Applications Flexible I/O applications: Use the 4 DIO channels as additional inputs or outputs depending on the application – no software reconfiguration, just rewire. Ideal for machines with varying sensor/actuator configurations. Applications requiring RS232: Connect legacy devices, barcode readers or serial printers directly via the front-mounted RS232 port (COM2) – without occupying the RS485 ports. Mobile commissioning: USB-C port on the front accepts standard phone data cables – no special programming cable required for PLC and HMI downloads. 🖥️ Display and Touch 4.3" TFT display, 480 × 272 pixels, 256K colors. LED backlight 50,000 hours. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments 4-wire resistive touchscreen. Operation with safety gloves or slightly wet fingers is straightforward. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45). Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2) + RS232 (COM2, front panel). Modbus RTU master/slave on Port1. Max. 115,200 bps. CAN bus: Up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-C). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Motion control and HSC wizard. Free download at en.kinco.cn. KincoDTools – HMI configuration. 🏷️ Manufacturer and Reliability The MK043E-27DT is CE certified and carries the RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout 119 × 93 mm, mounting depth 45.42 mm. ⚠️ Note: The MK043E-27DT is 14 mm deeper than other MK043 models – verify available installation depth before ordering. Overall dimensions: 132 × 102 × 45.42 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

💡 This version is supplied with a neutral front panel without Kinco branding – ideal for OEM applications under your own brand name. For anyone looking for a compact all-in-one solution for simple to mid-range machine control, the Kinco MK043E-20DT combines a 4.3" touch panel and PLC controller in a single housing. Particularly suited for applications where the panel cutout is restricted and a 7" display would be unnecessarily large – without making significant compromises on I/O capacity or connectivity. 🏭 Typical Applications Small machines and compact systems: Conveyors, dosing systems, mixing stations or refrigeration units with limited cabinet space – the MK043E-20DT fits controller and operator panel into a 119 × 93 mm panel cutout. Retrofit and replacement: Replace legacy controllers with separate operator panels using a single compact unit. The device communicates via Modbus RTU with existing drives, sensors and actuators. Expandable solutions: Connect up to 8 KS expansion modules via CAN bus when 9 DI + 9 DO + 2 AI is not enough. 🖥️ Display and Touch 4.3" TFT display, 480 × 272 pixels, 256K colors – sufficient for simple process displays, setpoint entry and status messages. LED backlight with 50,000 hours lifespan. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments Like all MK devices, the MK043E-20DT uses a 4-wire resistive touchscreen. Operation with safety gloves or slightly wet fingers is straightforward. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45) – network download and remote access via KDManager. 2 × RS485 (Port1 + Port2) – Modbus RTU master/slave, programming, free communication. Max. 115,200 bps. CAN bus – up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-B). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Motion control and HSC wizard (4 × HSC up to 50 kHz), offline simulator. Free download at en.kinco.cn. KincoDTools – HMI configuration, same platform as the Kinco F2 HMI series. 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience developing HMI, PLC and drive technology for the global industrial market. The MK043E-20DT is CE certified and carries the RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout dimensions 119 × 93 mm, mounting depth 32 mm. Scope of delivery: MK043E-20DT-Blank (neutral front panel), 4 × mounting clips with screws, detachable terminal blocks pre-installed. Overall dimensions: 132 × 102 × 32 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

For temperature control applications that require direct measurement of resistance temperature detectors without a separate transmitter module, the Kinco MK070E-27DRT integrates 3 RTD inputs (Pt100, Cu50, Pt1000) directly into a 7" HMI+PLC device – alongside 12 DI, 12 relay outputs and full Ethernet connectivity. 🏭 Typical Applications Temperature control systems: Heating, drying, cooling or process temperature regulation where Pt100 or Pt1000 sensors are already installed. No additional analog input module required. Retrofitting temperature monitoring: Replace standalone temperature controllers with an integrated HMI+PLC solution that shows temperature trends, alarms and setpoints on the built-in 7" display. Relay-switched process control: 12 relay outputs for switching heating elements, contactors or valves at AC 250 V or DC 30 V. 🖥️ Display and Touch 7" TFT display, 800 × 480 pixels, 256K colors. LED backlight 50,000 hours. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments The MK070E-27DRT features a 4-wire resistive touchscreen. Operation works reliably even with safety gloves or slightly wet fingers. 🌡️ RTD Temperature Inputs 3 × RTD input channels – support Pt100 (-200 to +850 °C), Cu50 (-50 to +150 °C) and Pt1000 (-50 to +300 °C) as well as resistance measurement (0–2,000 Ω). 2-wire and 3-wire RTD wiring supported. Unused channels must be short-circuited. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45). Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2): Modbus RTU master/slave. Max. 115,200 bps. CAN bus: Up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-B). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Free download at en.kinco.cn. KincoDTools – HMI configuration. ⚠️ Note: Relay outputs do NOT support high-speed pulse output (PTO/PWM). 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience in HMI, PLC and drive technology. The MK070E-27DRT is CE certified and carries RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout 192 × 138 mm, depth 34 mm. 4 mounting clips included. Overall dimensions: 204 × 150 × 34 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

For anyone looking to control purely digital applications with both fast transistor switching and relay outputs for AC/DC loads, the Kinco MK070E-32DX combines 7" touch panel and PLC in one device – with a mixed output configuration of 4 PNP transistor outputs and 12 relay outputs, and no analog I/O on board. 🏭 Typical Applications Valve and contactor control: Applications with inductive loads (solenoid valves, motor contactors, lamps) where relay switching of AC or DC loads up to 2 A per channel is required. Mixed-load machines: 4 fast transistor outputs (PTO/PWM capable) for stepper/servo drives, combined with 12 relay outputs for switching 24 V DC control signals and 230 V AC loads on the same controller. Expandable solutions: Connect up to 8 KS expansion modules via CAN bus for additional I/O, including analog channels if needed. 🖥️ Display and Touch 7" TFT display, 800 × 480 pixels, 256K colors. LED backlight with 50,000 hours lifespan. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments The MK070E-32DX features a 4-wire resistive touchscreen. Operation works reliably even with safety gloves or slightly wet fingers. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45). Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2, DB9): Modbus RTU master/slave, programming, free communication. Max. 115,200 bps. CAN bus: Up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-B). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. Configure in KincoDTools under [IOT]. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. 4 × high-speed pulse outputs (Q0.0, Q0.1, Q0.4, Q0.5 – transistor outputs only). Motion control wizard. Free download at en.kinco.cn. KincoDTools – HMI configuration. ⚠️ Note: Relay outputs do NOT support high-speed pulse output (PTO/PWM). Only the 4 transistor outputs support pulse functions. 🏷️ Manufacturer and Reliability Kinco Automation is an established manufacturer with extensive experience in HMI, PLC and drive technology. The MK070E-32DX is CE certified and carries RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout 192 × 138 mm, depth 34 mm. 4 mounting clips included. Overall dimensions: 204 × 150 × 34 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

For heating, drying or thermal process applications that require direct thermocouple measurement without a separate transmitter, the Kinco MK043E-20DTC integrates 2 thermocouple inputs (types J, K, E, T) into a compact 4.3" HMI+PLC device – alongside 9 DI, 9 DO and full Ethernet connectivity. 🏭 Typical Applications Heating and drying systems: Direct connection of J or K thermocouples for temperature control up to 1,300 °C – no transmitter required, no additional analog module. Industrial ovens and process chambers: Compact installation in limited cabinet space (panel cutout 119 × 93 mm) with integrated display for temperature setpoints, alarms and trend views. Compact temperature controllers: Replace separate temperature controllers with a combined HMI+PLC solution for two independent temperature zones. 🖥️ Display and Touch 4.3" TFT display, 480 × 272 pixels, 256K colors. LED backlight 50,000 hours. HMI CPU: 700 MHz RISC, 128 MB Flash + 64 MB DDR2. 🧤 Resistive Touch: Suitable for Gloves and Industrial Environments 4-wire resistive touchscreen. Operation with safety gloves or slightly wet fingers is straightforward. 🌡️ Thermocouple Inputs 2 × thermocouple input channels – support types J (-100 to +1,200 °C), K (-100 to +1,300 °C), E (-80 to +1,000 °C) and T (-100 to +400 °C). Internal cold-junction compensation included. Note: module self-heating adds approx. 2–4 °C to the measured value. 🔌 Connectivity and Interfaces Ethernet 10/100M (RJ45). Factory default IP: 192.168.0.252. 2 × RS485 (Port1 + Port2): Modbus RTU master/slave. Max. 115,200 bps. CAN bus: Up to 8 KS expansion modules. USB host (Type-A) + USB slave (USB-B). 🌐 IoT and Remote Access Built-in Kinco IoT client for remote download, transparent PLC access and VNC monitoring. 🔗 Programming: KincoBuilder + KincoDTools KincoBuilder – IEC 61131-3: LD and IL. Free download at en.kinco.cn. KincoDTools – HMI configuration. 🏷️ Manufacturer and Reliability The MK043E-20DTC is CE certified and carries the RoHS and EAC markings. Kinco devices are deployed at well over 100 spstiger customers across Germany. 🔧 Mounting and Scope of Delivery Panel mount: Cutout 119 × 93 mm, depth 32 mm. 4 mounting clips included. Overall dimensions: 132 × 102 × 32 mm. Power supply: DC 24 V (20.4–28.8 V), max. 10 W.

📌 Hardware Generation 08 (production from 01/2023): Current hardware revision with firmware line V2.x. Fully cloud-ready, compatible with easyE RTD Advanced, all EASY-COM expansion modules and all current .e80 projects from easySoft 8. For anyone who needs a compact programmable controller for machines, equipment or building services – without the effort and cost of a full-scale PLC system – the Eaton EASY-E4-UC-12RC1 offers a complete nano-PLC with integrated display, Ethernet port and onboard Modbus TCP. The controller combines 8 digital inputs (4 of which can be switched to analog), 4 relay outputs up to 10 A AC and a real-time clock in a 4-SU housing. Programming is done on a PC with easySoft 8 in four languages (LD, FBD, ST, EDP) – or, when needed, directly on the device via the LCD display and keypad. 🏭 Typical applications Machine and equipment retrofit: Replace legacy relay logic in control cabinets with a flexible programmable solution – including Ethernet connectivity for remote access. Pump and fan control: Up to 4 high-speed counter inputs (10 kHz) for flow measurement or speed detection – including a real-time clock for time programs. Building automation: Coordinate lighting, heating, ventilation and air conditioning centrally. Pass data to higher-level systems via Modbus TCP. Energy management: Connect energy meters (e.g. Eaton EMD3P) and evaluate via the integrated data logging and cloud connectivity. 🖥️ Display and operation The monochrome LCD display with 128 × 96 pixels shows 6 lines of 16 characters – sufficient for status displays, simple operating menus and direct programming on the device via the eight buttons. The real-time clock runs at ± 5 s per day (≈ ± 0.5 h per year) and can be synchronised via the network. ⚡ Inputs and outputs in detail 8 digital inputs (I1 – I8): Input voltage 12 V DC, 24 V DC or 24 V AC. I1 – I4 additionally usable as high-speed counters up to 10 kHz, frequency counters up to 5 kHz or as incremental encoder input pairs (2 × 5 kHz, 90° offset). 4 analog inputs (I5 – I8): 0 – 10 V DC, 12-bit resolution, accuracy ± 2 %. With DC supply, switchable between digital and analog operation. 4 relay outputs: 8 A DC at 24 V (UL R 300) or 10 A AC at 240 V (UL B 300). Service life 10 million mechanical operations, 25,000 operations under typical load. 🔌 Power supply – Universal Current The UC variant accepts both DC and AC: 12 V DC (10.2 – 14.4 V), 24 V DC (20.4 – 28.8 V) or 24 V AC (20.4 – 26.4 V, 50/60 Hz). Reverse polarity protection included. Power consumption in operation: 3 W. 🌐 Communication and expansion Onboard: Ethernet (1 × RJ45, 10/100 Mbit/s) with TCP/IP and Modbus TCP. A microSD slot enables program backups, data logging and firmware updates without a PC. For serial bus systems, the device can be extended with the EASY-COM-RTU-M1 for Modbus RTU (master/client or slave/server). Up to 11 I/O expansion modules per base device – maximum 188 I/O points in full configuration. 💻 Programming with easySoft 8 The free demo version allows full engineering – only the final upload to the device requires the EASYSOFT-SWLIC license. Supported languages: LD (Ladder Diagram): Classic PLC logic per IEC 61131-3 FBD (Function Block Diagram): Graphical logic with function blocks ST (Structured Text): Similar to a high-level language, for complex calculations EDP (easy Device Programming): Eaton-specific, programmable directly on the device 🏷️ Manufacturer and reliability Eaton is one of the established industrial manufacturers in the European market – the easy family has been around since the late 1990s. The EASY-E4-UC-12RC1 is certified to CE, UL Listed (file E205091), cULus per UL 61010, CSA C22.2 No. 61010, EN 50178, EN 61010, EN 61131-2, EN 61000-6-2/-3 and DNV GL. It is additionally approved for UL Hazardous Location Class I Division 2, usable in groups A (acetylene), B (hydrogen), C (ethylene) and D (propane). 🔧 Mounting and scope of delivery DIN-rail mounting (35 mm per IEC/EN 60715) or wall mounting with bracket ZB4-101-GF1 (available separately). Screw terminals for cross-sections 0.2 – 4 mm² solid or 0.2 – 2.5 mm² flexible with ferrule, tightening torque 0.6 Nm. Dimensions: 72 × 90 × 58 mm (W × H × D), weight 0.25 kg, protection IP20. Scope of delivery: EASY-E4-UC-12RC1 control relay, operating instructions. Note: easySoft 8 license and patch cable to be ordered separately. For serial bus expansions an EASY-COM-RTU-M1 is recommended. ⚠️ Important notice on safety-related applications Eaton prohibits the use of the easyE4 for safety-relevant functions (personal or machine protection) and safety-related controls (burner, emergency stop, two-hand safety controls). Dedicated safety components are required for such functions.

7" widescreen HMI with full-fledged PLC from THINGET at a tiger price. Versatile feature set for simple control, positioning and regulation tasks. In addition to the HMI touch panel, various function keys are also available for free use.Comprehensive instruction set (16 Bit