Solidot Modbus-TCP bus coupler for XB6 remote I/O with power supply unit and end cap
From
€129.28 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: Remaining stock
- Product Benefits 2: 5 coupler versions
- Product Benefits 3: Power module and cap included
- Product Benefits 4: 5 V backplane bus
- Product Benefits 5: -10 °C to +60 °C
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot Profinet bus coupler for XB6 remote I/O with power supply unit and end cap
From
€142.08 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: Remaining stock
- Product Benefits 2: 5 coupler versions
- Product Benefits 3: Power module and cap included
- Product Benefits 4: 5 V backplane bus
- Product Benefits 5: -10 °C to +60 °C
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot bus coupler Ethernet/IP for XB6 remote I/O with power supply unit and end cap
From
€142.08 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: Remaining stock
- Product Benefits 2: 5 coupler versions
- Product Benefits 3: Power module and cap included
- Product Benefits 4: 5 V backplane bus
- Product Benefits 5: -10 °C to +60 °C
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot Ethercat bus coupler for XB6 remote I/O with power supply unit and end cap
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: Remaining stock
- Product Benefits 2: 5 coupler versions
- Product Benefits 3: Power module and cap included
- Product Benefits 4: 5 V backplane bus
- Product Benefits 5: -10 °C to +60 °C
Solidot bus coupler Profibus DP slave for XB6 remote I/O with power supply unit and end cover
From
€158.72 *
🔌 PROFIBUS DP bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks PROFIBUS DP to the controller and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. For installations staying on PROFIBUS this is our remote I/O answer — we do not stock the newer XB6S series with PROFIBUS.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
- Product Benefits 1: PROFIBUS DP
- Product Benefits 2: Power module and cap included
- Product Benefits 3: 5 V backplane bus
- Product Benefits 4: -10 °C to +60 °C
- Product Benefits 5: DIN rail, spring terminals
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten