Three-phase frequency inverters are operated with a mains voltage of 380/400 VAC. The performance of three-phase frequency inverters is higher compared to single-phase frequency inverters with a 230 VAC power supply.
Our Kinco and INVT frequency inverters are modern and versatile devices with a wide range of functions and interfaces and a very good price/performance ratio.
Compact Kinco frequency inverter KC100 single-phase and three-phase 230/400 V AC
From
€58.37*
Versatile compact frequency inverter from Kinco for driving asynchronous three-phase motors (three-phase). The KC100 is the latest frequency converter model from Kinco and was introduced in 2024. With the KC100, Kinco is passing on positive price developments in power electronics components to end customers without compromising on quality, reliability or function.Compared to the previous CV20 series, this model offers the following improvements:AVR voltage regulation, to compensate for fluctuating mains voltages, e.g. for use in developing countriesVector controlS-curve acceleration for smooth starting and braking, e.g. for positioning or inertial loadsIntegrated brake chopper for braking inert loadsAuto-tuning of motor parameters for smoother motor operationFan control according to cooling requirements (instead of continuous operation)Better overcurrent suppression (automatic speed reduction), to avoid shutdowns with errorsSpeed tracking, determination of the current motor speed and start from the current speedReal Modbus RTU protocol (RS-485) for parameterization (the predecessor CV20 uses a non-standardized function code 41 for permanent parameterization)Maximum frequency 600 Hz for high speed applicationsSimple connection of an external control unit via extension connectionSpring terminals I/O terminal for quick wiring, e.g. of series devicesThe following functions are also available with the KC100 (comparable to CV20):Frequency setting via frequency table with 8 values via 3 digital inputs (CV20 = 15 values with 4 inputs)Frequency specification via analog input 0 - 10 V, 0 - 20 mAFrequency specification via Modbus RTUFrequency specification via PID control (frequency inverter as actuator for pumps, for example)Frequency specification via pulse input up to 50 kHz (new)Known limitations:No integrated EMC filter, external EMC filter requiredDigital inputs can only be used as relay input / NPN input (minus-switching)
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
INVT frequency inverter vector control GD-27, STO function, applicable for AM and PM, IP20
From
€108.80*
The GD27 from INVT is a flexible and compact frequency inverter that is ideal for use in series machines.STO function (SIL 2) for safe shutdown and requirements in accordance with the Machinery Directive Built-in EMC filter (C2 for 230 V, C3 for 400 V) Suitable for three-phase asynchronous and synchronous motors Integrated brake chopper for inertial generative loads GD27 models with 230 V and 0.4 kW or 0.7 kW are passively cooled and have no fan The spring terminals for the I/O on the front are very suitable for quick wiring in series machines Note: The digital input terminals are NPN (negative switching). They must therefore be controlled with a relay output or NPN output. Alternatively, the control commands can also be transmitted via Modbus RTU (2-wire). This saves wiring work and increases the variety of functions that can be addressed via the control unit. If you require digital inputs in PNP version (positive switching), the INVT GD20 is well suited.
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
%
Kinco frequency inverter FV20-4T-0007G (0.75 kW) three-phase 400 VAC
€110.00*
€146.22*
(24.77% saved)
Very powerful three-phase 400 VAC, 50Hz/60Hz frequency inverter in the 0.75 kW version with many convenient functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers many convenient functions for this price range, in particular vector control without encoder and optional vector control with encoder (with correspondingly retrofitted card for speed feedback) as well as integrated filter and brake unit.
V/F control, vector control
Very simple wiring thanks to screw terminals on the front
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
Frequenzumrichter INVT GD28 mit STO und optionaler Kommunikationskarte
From
€82.08*
Die neue GD28-Frequenzumrichter Serie von INVT bietet viel Funktionsumfang zu einem besonders attraktiven Preis-Leistungsverhältnis.Die optionale Kommunikationskarte ermöglicht die günstige Einbindung der Geräte in Profinet, EtherCAT oder Modbus-TCP-Netze. Eine Karte für alle Kommunikationsarten ist vor allem für Systemintegratoren interessant, die Projekte mit unterschiedlichen Bus-Technologien flexibel umsetzen möchten.Die Geräte haben eine STO-Sicherheits-Funktion (Safe Torque Off).Die Digitaleingänge unterstützen PNP und NPN-Anschaltung und sind damit für alle Märkte geeignet.Ein moderner USB-C-Port macht die Konfiguration in Kombination mit der INVT Worksshop-Software zum Kinderspiel.
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
M-Driver M980 Series VFD IP66 jet-proof and dust-proof frequency inverter
From
€117.92*
The M980 from M-Driver is a frequency inverter with IP66 protection for operation in damp or dusty environments. The device has an integrated fan, which is also IP66 rated and works even in damp conditions.The M980 offers many convenient functions such as PID control, special water pressure control, control via Modbus or simple time sequence control. The inverter can control three-phase asynchronous motors and synchronous motors; with deactivated output phase monitoring, even single-phase AC motors can be controlled.Small panel units are available as accessories, which can be used to easily save and copy parameter sets.The most important limitations arethere is no configuration software, so the inverter must be parameterized via the panel or Modbus RTUonly 2 digital inputs are available for control via digital terminalsthe digital inputs are only designed in NPN , so coupling relays are required for control via PLC with PNP outputsonly 1 analog input availableThe devices are only available for filter class C3 an external filter is required for C2 or better
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
discontinued
compact Kinco frequency converter CV20-4T-0007G (0.75 kW) three-phase 380 VAC
€129.41*
Frequency converter three-phase 380 VAC, 50Hz/60Hz in the
- No longer available
- Delivery Time : 3 bis 5 Tage
discontinued
compact Kinco frequency converter CV20-4T-0015G (1.5 kW) three-phase 380 VAC
€137.82*
Frequency converter three-phase 380 VAC, 50Hz/60Hz in the
- Available
- Delivery Time : 3 bis 5 Tage
discontinued
compact Kinco frequency converter CV20-4T-0022G (2.2 kW) three-phase 380 VAC
€147.90*
Frequency converter three-phase 380 VAC, 50Hz/60Hz in the
- No longer available
- Delivery Time : 3 bis 5 Tage
Kinco frequency inverter KC200-4T- three-phase 400 VAC
From
€153.68*
Very powerful three-phase 400 VAC, 50Hz/60Hz frequency inverter in the 22 kW version with many convenient functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase. The frequency inverter offers many convenient functions for this price range, in particular vector control without encoder and optional vector control with encoder (with correspondingly retrofitted card for speed feedback) as well as integrated filter and brake unit.
V/F control, vector control
Very simple wiring thanks to screw terminals on the front
Suitable for MODBUS via RS-485
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
discontinued
compact Kinco frequency converter CV20-4T-0022G (2.2 kW) three-phase 380 VAC
€156.94*
Frequency converter three-phase 380 VAC, 50Hz/60Hz in the
- Available
- Delivery Time : 2-5 days
INVT frequency inverter GD-270, special inverter for fans and pumps-IP20
From
€165.24*
- Min. 1 Variant available.
- Delivery Time : 6 bis 8 Wochen
discontinued
Kinco frequency converter FV20-4T-0015G (1.5 kW) three-phase 400 VAC
€167.23*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 1.5 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially vector control without encoder and optionally vector control with encoder (if the speed feedback card is retrofitted accordingly) and brake unit.
V/F control, vector control
very simple wiring by screw terminals on the front side
Suitable for MODBUS via RS-485
- No longer available
- Delivery Time : 3 bis 5 Tage
Kinco frequency converter FV20-4T-0022G (2.2 kW) three-phase 400 VAC
€192.44*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 2.2 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially vector control without encoder and optionally vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
INVT GD-350A frequency inverter, vector control-STO-optional fieldbus-dual rating-IP20
From
€221.00*
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
Kinco frequency converter FV20-4T-0037G (3.7 kW) three-phase 400 VAC
€226.05*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 3.7 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially vector control without encoder and optionally vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
Kinco frequency inverter FV20-4T-0055G (5.5 kW) three-phase 400 VAC
€250.00*
Very powerful three-phase 400 VAC, 50Hz/60Hz frequency inverter in the 5.5 kW version with many convenient functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers many convenient functions for this price range, in particular vector control without encoder and optional vector control with encoder (with correspondingly retrofitted card for speed feedback) and brake unit.
V/F control, vector control
Very simple wiring thanks to screw terminals on the front
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
INVT GD20 frequency inverter, vector control, STO function, IP20
From
€118.00*
The frequency inverter supports vector control and has an STO (Safe Torque Off SIL2 PLd) safety stop function.An EMC filter (C3) is integrated from an output of 4 kW. It is available as an accessory for lower power classes.
- Min. 1 Variant available.
- Delivery Time : 3 bis 5 Tage
Kinco frequency inverter FV20-4T-0075G (7.5 kW) three-phase 400 VAC
€280.00*
Very powerful three-phase 400 VAC, 50Hz/60Hz frequency inverter in the 7.5 kW version with many convenient functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers many convenient functions for this price range, in particular vector control without encoder and optional vector control with encoder (with correspondingly retrofitted card for speed feedback) as well as integrated filter and brake unit.
V/F control, vector control
Very simple wiring thanks to screw terminals on the front
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
%
discontinued
Kinco frequency converter FV20-4T-0150G (15 kW) three-phase 400 VAC
€300.00*
€420.00*
(28.57% saved)
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 15 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially a vector control without encoder and optionally a vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
%
Kinco frequency converter FV20-4T-0110G (11 kW) three-phase 400 VAC
€300.00*
€324.00*
(7.41% saved)
previously €324.00*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 11 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially a vector control without encoder and optionally a vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
previously €324.00*
Kinco frequency inverter FV20-4T-0220G (22 kW) three-phase 400 VAC
€600.00*
Very powerful three-phase 400 VAC, 50 Hz/60 Hz frequency inverter in the 22 kW version with many convenient functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers many convenient functions for this price range, in particular vector control without encoder and optional vector control with encoder (with correspondingly retrofitted card for speed feedback) as well as integrated filter and brake unit.
V/F control, vector control
Very simple wiring thanks to screw terminals on the front
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
%
Kinco frequency converter FV20-4T-0370G (37 kW) three-phase 400 VAC
€810.00*
€951.00*
(14.83% saved)
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 37 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially vector control without encoder and optionally vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
Kinco frequency converter FV20-4T-0450G (45 kW) three-phase 400 VAC
€1,236.00*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 45 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially a vector control without encoder and optionally a vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter and brake unit.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage
Kinco frequency converter FV20-4T-0550G (55 kW) three-phase 400 VAC
€1,385.00*
Very powerful frequency inverter three-phase 400 VAC, 50Hz/60Hz in the 55 kW variant with many comfort functions for controlling drives.Single-phase refers to the mains voltage, the motor connection is three-phase.The frequency inverter offers a lot of comfort functions for this price range, especially vector control without encoder and optionally vector control with encoder (if the speed feedback card is retrofitted accordingly) as well as integrated filter.
V/F control, vector control
very easy cabling by screw terminals on the front side
Suitable for MODBUS via RS-485
- Available
- Delivery Time : 3 bis 5 Tage