Langir push-button L22U M22 ultra-short vandalism-protected
€7.50*
Ultra-short push-button flat in size M22 from Langir. With an installation depth of only around 12 mm, this push-button can be installed in very flat housings.
- Available
- Delivery Time : 3 bis 5 Tage
Langir push-button V22 M22 vandal-proof
€9.88*
Langir stainless steel push-buttons in various designs.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €7.09*
Langir LED push-button L22U M22 ultra-short with ring LED
€8.52*
Ultra-short flat LED push-button in size M22 from Langir. With an installation depth of only around 12 mm, this push-button can be installed in very flat housings. With a maximum switching capacity of 50 mA at 24 V DC, this push-button is suitable for PLC inputs and coupling relays.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €7.24*
Langir LED push-button L22M M22 with short operating distance and ring LED
€12.41*
Robust LED push-button with short stroke. Thanks to the short stroke, operators are less fatigued, but it is also easier for them to trigger the button unintentionally. This push-button is therefore very suitable for selection applications, for example for program selection. With a maximum switching capacity of 50 mA at 24 VDC, the switch is well suited for use on PLC inputs or on a coupling relay .
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €8.09*
Langir LED push-button L22T M22 with LED switch-on symbol vandal-proof
€12.50*
Langir LED push-button
L22T
M22 with LED switch-on symbol vandalism-protected
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €9.45*
Langir signaling device (buzzer) LF19 M19 with flashing LED ring
€14.06*
A signal transmitter (buzzer) with flashing LED ring. You can easily connect the signal transmitter to a 24 V DC PLC output to output errors or warnings. The buzzer is available with yellow and red LEDs with slightly different signal frequencies.
- Available
- Delivery Time : 3 bis 5 Tage
Langir LED push-button L22A M22 with LED ring
€14.96*
Robust LED push-button in size M22 with LED ring in various colors. The push-button can switch up to 5 A at 230 V AC and is also suitable for operation on a PLC input or coupling relay.The power supply for the LED is 24 V DC and is well suited for PLC transistor outputs. The ring LED lights up regardless of the switching status of the push-button.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €11.66*
Langir LED push-button M22 CP22 Capacitive changeover switch with LED ring
€24.78*
Langir LED push-button M22 CP22 Capacitive changeover switch with LED ring
- Min. 1 Variant available.
- Delivery Time : 3-4 weeks
Variants from €22.30*
TP-LINK WR802N - Nano Router as WLAN adapter for HMI and SPS
€23.53*
TP-Link WR802N WLAN adapter for connecting PLC or HMI with Ethernet port to a WLAN network. After configuration, simply connect the adapter to the Ethernet ports of your PLC or HMI. The adapter then connects as a subscriber to your WLAN network (router), routes the Ethernet connection of your HMI or PLC over the network.
- Available
Transcend JetFlash 740K Rugged 8 GB USB flash drive for industrial environments
€26.00*
The Transcend JetFlash 740K is a USB memory for particularly demanding industrial environments. The memory is particularly persistent and durable and is ideal for long-term data logging applications in combination with our HMI..
High-quality MLC NAND flash and SLC mode (also called SuperMLC) for exceptional endurance and reliabilityHot-swapping for easy plug-and-playAverage time between failures (MTBF) 3,000.000 hour(s)TeraBytes Written up to 150 TBW
Optimized for industrial applications:
SLC mode for very fast writes for data logging with high temporal resolutionWear leveling for extended lifetime of the memoryModern Garbage Collection for memory optimizationBad Block Management to prevent data lossTechnologies to reduce Read Disturbance to prevent data loss
- Available
- Delivery Time : 3 bis 5 Tage
Tip
INVT Bremswiderstand Anwendbar für Wechselrichter
INVT Bremswiderstand: Passend zu den Frequenzumrichtern von INVT. Die INVT-Frequenzumrichter haben eingebaute Brems-Chopper, an die diese Widerstände angeschlossen werden können, um Energie aus dem Abbremsen des Motors abzuführen.Nutzen Sie Bremswiderstände, wenn die Last ein hohes Trägheitsmoment hat und der Frequenzumrichter beim Abbremsen (Verzögern) in den Fehlerzustand geht.