Solidot XB6 modulare Remote I/O-Serie mit verschiedenen Buskopplern
Die XB6-Serie ist eine flexible, erweiterbare und kostengünstige Remote-E/A-Lösung von Solidot. Eine große Auswahl an Buskopplern ermöglicht dir die Einbindung von Signalen in viele verschiedene Automatisierungssysteme. Eine große Vielfalt an Modulen bietet für unterschiedliche Anwendungen die ideale Lösung.
Es gibt in dieser Serie sogar Profibus-Koppler, um neue Signale modern in bestehende Infrastruktur zu integrieren.
Solidot Modbus-TCP bus coupler for XB6 remote I/O with power supply unit and end cap
From
€129.28 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot digital module 16 inputs & outputs (24 V DC) for XB6 remote I/O with 32 channels
From
€93.44 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S digital module with 32 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 32 digital channelsXB6-3200B: 32 inputs, 24 V DC, NPN or PNPXB6-0032B: 32 outputs, PNPXB6-1616B: 16 inputs and 16 outputs in one moduleInputs at 4 mA with 3 ms filter time, outputs PNP up to 500 mA per channel with overvoltage and overcurrent protection, all channels optically isolated (500 V).
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €87.08 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot relay output module for XB6 remote I/O with 12 relay output channels
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S relay module from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 12 relay outputsFor loads a transistor output cannot handle: contactors, solenoid valves, indicator lamps or circuits on a different potential. Rated load 5 A per channel, for resistive and inductive loads. Control side 24 V DC, isolation via optocoupler and relay, a green LED per channel.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- No longer available
- Delivery Time : 3 bis 5 Tage
Solidot analog module / 4 analog inputs (4 - 20 mA) for XB6 remote I/O with 4 channels AI-adjustable
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 4 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 4 analog channelsXB6-A40V / XB6-A40I: 4 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A04V / XB6-A04I: 4 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current. The range is parameterised in the controller project, not set on the module.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot Profinet bus coupler for XB6 remote I/O with power supply unit and end cap
From
€142.08 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot temperature module 4 temperature inputs for XB6 remote I/O RTD and TC type (PT100, PT1000 & thermocouple)
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S temperature module from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🌡️ Temperature inputs for thermocouples and RTDsXB6-A40TM: 4 channelsXB6-A80TM: 8 channelsThermocouples type K, J, E, S and B as well as Pt100 and Pt200 RTDs, in 2 or 3 wire connection. Sensor type and range are set per channel in the controller project — you do not need a separate module per sensor type.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- No longer available
- Delivery Time : 3 bis 5 Tage
Solidot digital module 32 outputs transistor (24 V DC) for XB6 remote I/O with 32 channels
From
€103.68 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S digital module with 32 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 32 digital channelsXB6-3200B: 32 inputs, 24 V DC, NPN or PNPXB6-0032B: 32 outputs, PNPXB6-1616B: 16 inputs and 16 outputs in one moduleInputs at 4 mA with 3 ms filter time, outputs PNP up to 500 mA per channel with overvoltage and overcurrent protection, all channels optically isolated (500 V).
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €87.08 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot digital module 32 inputs (24 V DC) for XB6 remote I/O with 32 channels
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S digital module with 32 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 32 digital channelsXB6-3200B: 32 inputs, 24 V DC, NPN or PNPXB6-0032B: 32 outputs, PNPXB6-1616B: 16 inputs and 16 outputs in one moduleInputs at 4 mA with 3 ms filter time, outputs PNP up to 500 mA per channel with overvoltage and overcurrent protection, all channels optically isolated (500 V).
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot analog module / 8 analog inputs (4 - 20 mA) for XB6 remote I/O with 8 channels AI-adjustable
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 8 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 8 analog channelsXB6-A80V / XB6-A80I: 8 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A08V / XB6-A08I: 8 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- No longer available
- Delivery Time : 3 bis 5 Tage
Solido temperature module /8 temperature inputs for XB6-Remote-I/O-RTD and TC type (resistance temperature detector&thermocouple)
From
€156.16 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S temperature module from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🌡️ Temperature inputs for thermocouples and RTDsXB6-A40TM: 4 channelsXB6-A80TM: 8 channelsThermocouples type K, J, E, S and B as well as Pt100 and Pt200 RTDs, in 2 or 3 wire connection. Sensor type and range are set per channel in the controller project — you do not need a separate module per sensor type.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €113.92 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot digital module 16 outputs (24 V DC) for XB6 remote I/O with 16 channels
From
€62.72 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S digital module with 16 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 16 digital channelsXB6-1600B: 16 inputs, 24 V DC, NPN or PNP, 4 mA, 3 ms filter timeXB6-0016B: 16 outputs, PNP up to 500 mA per channel, with overvoltage and overcurrent protectionAll channels optically isolated (500 V), for resistive and inductive loads.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €48.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot digital module 16 inputs (24 V DC) for XB6 remote I/O with 16 channels
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S digital module with 16 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 16 digital channelsXB6-1600B: 16 inputs, 24 V DC, NPN or PNP, 4 mA, 3 ms filter timeXB6-0016B: 16 outputs, PNP up to 500 mA per channel, with overvoltage and overcurrent protectionAll channels optically isolated (500 V), for resistive and inductive loads.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot analog module / 4 analog outputs (0 - 10 V DC) for XB6 remote I/O with 4 channels AI-adjustable
From
€121.60 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 4 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 4 analog channelsXB6-A40V / XB6-A40I: 4 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A04V / XB6-A04I: 4 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current. The range is parameterised in the controller project, not set on the module.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €108.80 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot serial communication module for XB6 remote I/O (RS485 / RS422 / RS232)
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S-C01SP from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Serial interface at the remote stationBrings RS485, RS422 or RS232 to where the serial device actually sits — a scale, a barcode reader, an instrument or an older drive. The station carries the data to the controller over the fieldbus, so you do not run a serial cable across the plant.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot high-speed counter module for XB6 remote I/O with 2 channels
⚠️ Remaining stock. The XB6 series is being phased out, its successor is the XB6S series. There is no direct XB6S counterpart for this module — talk to us if you need a replacement or an extension. While stock lasts we keep supplying XB6.
🔌 Counting inputs for incremental encodersTwo channels for fast pulses a normal digital input card can no longer follow — an incremental encoder on an axis, a flow meter, or counting pulses on a packaging machine. Counting happens in the module, the controller only reads the value.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot PWM module for XB6 remote I/O with 4 channels
⚠️ Remaining stock. The XB6 series is being phased out, its successor is the XB6S series. There is no direct XB6S counterpart for this module — talk to us if you need a replacement or an extension. While stock lasts we keep supplying XB6.
🔌 4 PWM outputsProvides four pulse width modulated outputs — for heaters, fans, valves or LED lighting you want to control continuously without adding an analog output and a power stage for it. Duty cycle and frequency come from the controller.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot bus coupler Ethernet/IP for XB6 remote I/O with power supply unit and end cap
From
€142.08 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot Ethercat bus coupler for XB6 remote I/O with power supply unit and end cap
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S coupler kit from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 Bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks to the controller over the fieldbus and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. Available for EtherCAT, EtherNet/IP, Modbus TCP, PROFIBUS DP and PROFINET — the modules behind it stay the same in every case.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot bus coupler Profibus DP slave for XB6 remote I/O with power supply unit and end cover
From
€158.72 *
🔌 PROFIBUS DP bus coupler with power module and end capThe coupler is the head of an XB6 station: it talks PROFIBUS DP to the controller and supplies the attached I/O modules through the 5 V backplane. Power module and end cap are included. For installations staying on PROFIBUS this is our remote I/O answer — we do not stock the newer XB6S series with PROFIBUS.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €112.64 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot analog module / 8 analog outputs (0 - 10 VDC) for XB6 remote I/O with 8 channels AI-adjustable
From
€181.76 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 8 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 8 analog channelsXB6-A80V / XB6-A80I: 8 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A08V / XB6-A08I: 8 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €156.16 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot analog module / 8 analog outputs (4 - 20 mA) for XB6 remote I/O with 8 channels AI-adjustable
From
€181.76 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 8 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 8 analog channelsXB6-A80V / XB6-A80I: 8 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A08V / XB6-A08I: 8 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €156.16 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot analog module / 8 analog inputs (0 - 10 V DC) for XB6 remote I/O with 8 channels AI-adjustable
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 8 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 8 analog channelsXB6-A80V / XB6-A80I: 8 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A08V / XB6-A08I: 8 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Solidot analog module / 4 analog outputs (4 - 20 mA) for XB6 remote I/O with 4 channels AI-adjustable
From
€121.60 *
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 4 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 4 analog channelsXB6-A40V / XB6-A40I: 4 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A04V / XB6-A04I: 4 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current. The range is parameterised in the controller project, not set on the module.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage
Variants from €108.80 *
Available, delivery time: 3 bis 5 Tage
Preis exkl. MwSt., zzgl. Versandkosten
Solidot analog module / 4 analog inputs (0 - 10 V DC) for XB6 remote I/O with 4 channels AI-adjustable
⚠️ Remaining stock. The XB6 series is being phased out. Its successor is the XB6S analog module with 4 channels from the XB6S series. While stock lasts you can still get XB6 — for extending an existing installation that is often exactly what you want, because coupler and modules have to match.
🔌 4 analog channelsXB6-A40V / XB6-A40I: 4 inputs, voltage 0 – 10 V or -10 – +10 V, current 0 – 20 mA or 4 – 20 mAXB6-A04V / XB6-A04I: 4 outputs, same ranges16 bit resolution, ±0.1 % accuracy, sampling rate ≤ 1 ksps. Input impedance ≥ 2 kΩ for voltage, 100 Ω for current. The range is parameterised in the controller project, not set on the module.
⚙️ Series characteristics5 V backplane bus, supplied with 18 – 36 V DC through the power module in the coupler kit-10 °C to +60 °C operating, -20 °C to +75 °C storage, 95 % relative humidity without condensation, IP2035 mm DIN rail, pluggable spring-loaded terminals, a green LED next to every channelModule 106 x 73 x 25.7 mm, coupler and power module 106 x 61 x 22.5 mm
Technically XB6 is not a risk: the series has been in the field for years, the modules are mature and the documentation is complete. Manuals, GSDML, ESI and EDS files, EPLAN macros and 2D and 3D models are in the downloads section of this page.
- Available
- Delivery Time : 3 bis 5 Tage