Do you have questions? Our community may have already answered them!
Connect with others in our support forum.
Kinco RP20 power supply module for AK8x0M PLC and RP20 bus coupler
- 2.0 A bus current at 5 V
- 24 V DC ±20 %
- Overcurrent and polarity protection
- For RP20 couplers and AK8X0
- Only 12 mm wide
€32.00*
In stock
Lieferzeit: 3 bis 5 TageCustomers also bought
Customers also viewed
Your RP20 station is growing and the bus current of the coupler or PLC is no longer sufficient? The RP20-PW is a power supply module: it is fed with 24 V DC and supplies the following modules via the internal K-BUS with an additional 2.0 A at 5 V.
🏭 Typical Applications
Large stations: From about 12 to 14 modules on one coupler, its bus current is no longer sufficient for all modules.
Expanding the AK840M: The AK8X0 supplies 1.5 A for the attached modules; the RP20-PW adds more.
Operation at high ambient temperature: At 55 °C the bus current of coupler and PW drops to 1.6 A; the PW compensates.
🧩 Variants
RP20-PW: power supply module for RP20 stations and Kinco AK8X0.
🖥️ Key Technical Specs
Input: 24 V DC ±20 % (19.2 – 28.8 V DC), rated power 12 W.
K-BUS output: 5 V DC (4.75 – 5.25 V), 2.0 A; max. 1.6 A at 55 °C.
Protection: overcurrent, reverse polarity, surge; no galvanic isolation.
Indication: LED PR (supply OK) and ERR (supply fault).
🔗 Compatibility
The RP20-PW works in stations with the RP20C-ECT, the RP20C-CAN and on the Kinco AK840M. It supplies the digital, analogue and temperature modules mounted after it.
⚠️ Good to Know
Check the bus current: Add up the modules: 135 mA per digital module, 140 to 150 mA per analogue module, 160 mA per temperature module. If the total exceeds the value of the supply before it, add an RP20-PW to the station.
No hot swap: Only plug in or remove modules with the power switched off.
🏷️ Manufacturer and Standards
Kinco Automation develops PLCs, HMIs and drive technology. The RP20-PW is CE certified according to EN IEC 61000-6-2:2019 and EN IEC 61000-6-4:2019, EMC immunity according to IEC 61131-2, zone B. Operation −20 °C to +55 °C, storage −40 °C to +70 °C, 10 to 95 % relative humidity non-condensing, IP20.
🔧 Mounting and Scope of Delivery
Mounting: 35 mm DIN rail, snaps on sideways between the modules.
Dimensions: 12 × 100 × 80 mm (W × H × D), approx. 70 g, passive cooling.
Scope of delivery: one RP20-PW.
Technical Specifications
Login