Other

Other Kinco SPS

Extension cable for Kinco MK series - with 2 x RS-485 socket

With this extension cable, the devices of the MK series from Kinco, a combination device of HMI and PLC can be connected with the extensions. The extensions he Kinco KS-PLC series can be used so easily with the MK series. Internally MK-PLC and extension are connected via a CAN protocol, but this does not need to be programmed, it is sufficient to configure the extensions in the hardware configuration of the PLC in Kinco Builder.On the last extension should be activated via the DIP switches the end resistor.The extension cable is high quality with metal connector on HMI PLC side. In addition, the two RS-485 interfaces of MK-PLC are via a connector with screw contacts. This can be used to connect other Modbus devices or serial devices to MK-PLC.This cable is a service product for easier connection. You can also easily assemble your own cable for the extension. You can find the correct PIN assignment in the product photos.

spstiger

Available
Delivery Time : 2-5 days

€48.00 *

Available, delivery time: 2-5 days

Preis exkl. MwSt., zzgl. Versandkosten

Serial connection cable (RS-485) for Kinco CV20 frequency converter - open ends

This serial interconnect cable enables Kinco's CV20 frequency inverters to communicate via Modbus RTU in an RS-485 serial bus.Using special Modbus commands the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.

spstiger

Available
Delivery Time : 2-5 days
Product Benefits 1: CV20 über RS-485 verbinden
Product Benefits 2: über Modbus RTU ansteuern

€12.00 *

Available, delivery time: 2-5 days

Preis exkl. MwSt., zzgl. Versandkosten

Kinco K5 PLC K506-24DT - 24 I/O

14 digital inputs 24 VDC (PNP) 10 digital outputs transistor 24 VDC2 x RS-485 (Modbus RTU) You can program the Kinco K5 with the free Kinco-Builder programming software (available as a download a little further down this page).. Scope of delivery: PLC, programming cable serial.

Kinco

No longer available
Delivery Time : 3-4 weeks

From €154.82 *

No longer available

Preis exkl. MwSt., zzgl. Versandkosten

Details

Temperature expansion controller for Kinco RP20

Temperature meter extension Kinco RP20. Suitable for Kinco AK840M and bus couplers of the RP20 series.Compact module with low space requirement in the control cabinetEasy mounting on DIN railSpring terminals for quick wiringRemovable terminal block

Input and output variants

4 PT - 100 - inputs 4 thermocouple inputs

Kinco

Min. 1 Variant available.
Delivery Time : 3 bis 5 Tage

€92.16 *

Available in 30 days, delivery time 3 bis 5 Tage

Preis exkl. MwSt., zzgl. Versandkosten

Analog expansion controller for Kinco RP20

Kinco RP20 analog extension. Suitable for Kinco AK840M and bus couplers of the RP20 series.Compact module with low space requirement in the control cabinetEasy mounting on DIN railSpring terminals for fast wiringRemovable terminal block

Input and output variants

2 analog inputs + 2 analog outputs 4 Analogausgänge 4 analog inputs

Kinco

Min. 1 Variant available.
Delivery Time : 3 bis 5 Tage

€90.88 *

Available in 30 days, delivery time 3 bis 5 Tage

Preis exkl. MwSt., zzgl. Versandkosten

Power supply extension for Kinco RP20 controller

Diese Spannungsversorgungserweiterung fungiert als Verteilerklemme für 24 V DC für eure Kinco RP20-E/A-Erweiterungen und versorgt Erweiterungskarten über den Erweiterungsbus mit 5 V bis zu 5 A (10 Watt).

Kinco

Available
Delivery Time : 3 bis 5 Tage

From €25.60 *

Available, delivery time: 3 bis 5 Tage

Preis exkl. MwSt., zzgl. Versandkosten

Communication expansion board for Kinco AK840M controller

Interfaces

1 x CANopen 1 x RS-485 + 1 x RS-232

Kinco

Min. 1 Variant available.
Delivery Time : 3 bis 5 Tage

From €24.48 *

Available in 30 days, delivery time 3 bis 5 Tage

Preis exkl. MwSt., zzgl. Versandkosten

Kinco K5 PLC K506EA-30DT - 30 I/O of which 4 analog inputs and 2 analog outputs

14 digital inputs 24 VDC (PNP) 10 digital outputs transistor 24 VDC 4 analog inputs 4 - 20 mA / 0 - 10 V 2 analog outputs 4 - 20 mA / 0 - 10 V 2 x RS-485 (Modbus RTU) You can program the Kinco K5 with the free Kinco-Builder programming software (available as a download a little further down on this page). Scope of delivery: PLC, programming cable serial.