Extension cable for Kinco MK series - with 2 x RS-485 socket

€48.00*

Available, delivery time 2-5 days

Product number:
TI.MK.Extension.Cable
Product information "Extension cable for Kinco MK series - with 2 x RS-485 socket"
With this extension cable, the devices of the MK series from Kinco, a combination device of HMI and PLC can be connected with the extensions. The extensions he Kinco KS-PLC series can be used so easily with the MK series. 

Internally MK-PLC and extension are connected via a CAN protocol, but this does not need to be programmed, it is sufficient to configure the extensions in the hardware configuration of the PLC in Kinco Builder.
On the last extension should be activated via the DIP switches the end resistor.
The extension cable is high quality with metal connector on HMI PLC side. In addition, the two RS-485 interfaces of MK-PLC are via a connector with screw contacts. This can be used to connect other Modbus devices or serial devices to MK-PLC.
This cable is a service product for easier connection. You can also easily assemble your own cable for the extension. You can find the correct PIN assignment in the product photos.

Dimensions and environmental properties
Cable length: 2 m
Seit 2010 bieten wir innovative Produkte aufstrebender Automatisierungsmarken, engagierten technischen Support und Services rund um SPS, HMI und Antriebstechnik.

0 of 0 reviews

Leave a review!

Share your experiences with other customers.


Customers also viewed

Kinco KS123-14DR Digital Expansion for KS105 PLC
€48.74*
Speed feedback extension card (PG) for Kinco FV20 frequency inverters
€48.00*
Kinco KS122-12XR Digital Output Expansion for KS105 PLC
€53.78*

Customers also bought

Kinco KS122-12XR Digital Output Expansion for KS105 PLC
€53.78*
Kinco KS123-14DR Digital Expansion for KS105 PLC
€48.74*
Kinco KS121-16DX Digital Input Expansion for KS105 PLC
€48.74*