Do you have questions? Our community may have already answered them!
Connect with others in our support forum.
Kinco F2100E2 MAX 10.1" HMI touch panel, 64 GB flash, 2 GB RAM
- 64 GB flash + 2 GB RAM
- 2 × Ethernet, LAN0 gigabit
- 3 COM ports (RS232/485/422)
- For trend archives & recipes
- Isolated power supply
€539.00*
Available in 14 days, delivery time 3 bis 5 Tage
Compatible programming software
The 10-inch workhorse with the large memory: the Kinco F2100E2 MAX brings 64 GB flash and 2 GB RAM instead of 8 GB and 1 GB. Intended for plants that keep measured values in the device over long periods or manage hundreds of recipes locally.
🏭 Typical applications
Network separation with gigabit: LAN0 at 10/100/1000 Mbit/s for the upper-level network, LAN1 at 10/100 for the machine network — the standard case in machine building.
Legacy serial equipment plus network: three COM ports connect drives, scales and Modbus RTU nodes while the controller stays connected over Ethernet.
Retrofit without replacing the controller: over 60 PLC drivers in DToolsPro, symbolic tags straight from the Siemens TIA Portal — the operator interface is renewed, the PLC stays.
Remote access without extra hardware: built-in VPN and EdgeAccess 2.0 — access to the panel and pass-through to the PLC, with no additional router in the cabinet.
🖥️ Display and performance
The 10.1" TFT with 1024 × 600 pixels and 350 cd/m² shows process screens at a size that stays readable from two to three metres away. The quad-core ARM at 1.8 GHz with 1 GB RAM carries pages with many live values without noticeable delay when switching screens.
Resolution: 1024 × 600 pixels (near 16:9)
Brightness: 350 cd/m² | Contrast: 500:1 | Viewing angle: 70° / 70° / 60° / 60°
Touch: 4-wire resistive, 4H surface hardness
CPU: Quad-Core ARM 1,8 GHz
Memory: 2 GB RAM + 64 GB eMMC flash
Real-time clock: built in, NTP-synchronisable
🧤 Resistive touch: for gloves and damp environments
The 4-wire resistive touch responds to mechanical pressure. It works with safety gloves, with wet fingers and with any stylus — exactly where capacitive panels give up.
💡 No multi-touch, no swipe gestures. If you need pinch-to-zoom in trend charts, choose Kinco F2100HE2-PX (10,1", kapazitiv, Hochformat).
🔌 Interfaces and connectivity
Ethernet LAN0: 10/100/1000 Mbit/s (Gigabit), RJ45
Ethernet LAN1: 10/100 Mbit/s, RJ45 — second independent port for separated networks
COM0 (3-in-1): RS-232, RS-485 and RS-422 in one DB9 connector — one of them usable at a time
COM1: RS-485/RS-422
COM2: RS-232
USB: 1 × USB host (stick, keyboard, barcode scanner, webcam) + 1 × USB slave (program download)
💾 MAX: 64 GB flash and 2 GB RAM
The MAX is the memory upgrade of the F2100E2: 64 GB flash instead of 8 GB and 2 GB RAM instead of 1 GB. Display, CPU, housing and interfaces are identical.
When it pays off:
Trend archives over long periods: if you keep measured values in the device for months instead of exporting them, 8 GB fills up quickly. 64 GB moves that limit considerably.
Recipe management with many records: hundreds of product variants with dozens of parameters each are then held entirely locally — even when the network is down.
Large projects with many screens and bitmaps: 2 GB RAM keeps more pages in memory at once, so switching stays fluid.
💡 When it does not pay off: for a normal machine visualisation with operating screens, an alarm list and a short trend buffer, 8 GB and 1 GB RAM are sufficient. In that case the F2100E2 is the more economical device.
🌐 Protocols and PLC compatibility
If you need to merge data from different sources or visualise plants across vendor boundaries, the drivers shipped with Kinco DToolsPro do it directly — no separate communication processor, no licence fees. The software is free.
Modbus RTU (client and server) via RS-485/RS-422 — the standard for compact machines and legacy installations
Modbus TCP (client and server) via Ethernet — for networked controllers
OPC UA server and client — for cross-vendor networking and MES integration
MQTT publisher and subscriber, BACnet IP, NTP
Siemens TIA Portal: symbolic tags can be imported directly — no manual retyping of addresses
Vendor drivers (selection): Siemens S7-200/200 SMART/300/400/1200/1500 and LOGO!, Beckhoff TwinCAT, Mitsubishi MELSEC FX/FX5U/Q/iQ-R, Omron CJ/CS/CP/NJ/NX, Allen Bradley CompactLogix, Schneider Modicon, Delta DVP, Inovance, Panasonic FP, Xinje XC/XD/XL, CODESYS V3 — over 60 drivers in total
Remote access: built-in VPN function, EdgeAccess 2.0 for remote access and PLC pass-through
💡 Projects from the predecessor software DTools can be imported into DToolsPro.
🏷️ Manufacturer and reliability
Kinco Automation is an established manufacturer with years of experience developing HMI and drive technology for the global industrial market. The F2100E2 MAX is CE certified (EN IEC 61000-6-2:2019, EN IEC 61000-6-4:2019) and meets the EMC requirements for industrial use in Europe. Kinco HMIs are in service at well over 100 spstiger customers in Germany.
🔧 Mounting, environment and scope of delivery
Overall dimensions: 271 × 213 × 38 mm
Panel cut-out: 260 × 202 mm
Mounting: Panel mounting in the cabinet door, mounting clamps included
Housing: Engineering plastic, PCB with protective coating (three-proof coating)
Weight: 1.4 kg
Power supply: 18 – 28 V DC, galvanically isolated, 7 W at 24 V DC
Operating temperature: -10 °C to +60 °C
Storage temperature: -20 °C to +60 °C
Humidity: 0 – 90 % RH, non-condensing
Protection rating: IP65 (Front)
Technical Specifications
Login