compact plc

compact plc

Filter

Keine Angabe
Kinco
Nebenuhrensteuerung
spstiger
TP-Link
Vigor
Xinje

12 - 28 VDC
21 - 28 VDC
22 - 26 VDC

1 (Al2)
2
4
6
none

-10 to +10 V
-20 to +20 mA
0 - 10 V
0 - 20 mA
1 - 5 V
4 - 20 mA
12 Bit
14 Bit

1
2 - AO1- AO2
4
none

-5 to +5 V
-10 to +10 V
- 20 to + 20 mA
0 - 10 V
0 - 20 mA
1 - 5 V
4 - 20 mA
12 Bit

1 x Micro-USB als Programmierport 2 x RS-485 als RJ45-Anschluss (unterstützt Modbus RTU Master / Slave und freie serielle Kommunikation)
1 x Micro-USB als Programmierport 2 x RS-485 davon 1 x als A/B-Anschluss und 1 x als RJ45 für den leichten Anschluss(unterstützt Modbus RTU Master / Slave und freie serielle Kommunikation)
Ethernet WLAN IEEE 802.11n bis 300 Mbps (kompatibel mit IEEE 802.11b/g)
Modbus RTU (RS-485, 2-Draht)

7" / 18 cm HMI Touchpanel, 256 Farben TFT, Auflösung
Batteriegestützte Echtzeituhr
Batteriegestützte Echtzeituhr für Zeitsteuerungen
Batteriegestützte Echtzeituhr für Zeitsteuerungen, Programmierung über USB-Kabel
Batteriegestützte Echtzeituhr für Zeitsteuerungen, Programmierung über USB-Kabel, 6 Anschlüsse können sowohl als Eingang als auch als Ausgang genutzt werden
einfache, frei programmierbare LED-Anzeige,2 x Potentiometer z.B. für Sollwertvorgaben oder zum Anpassen von Timern;

ABB AC500 (nur Ethernet)
Allen Bradley (nur Ethernet)
BACnet (nur Ethernet)
Beckhoff Twincat ADS (Ethernet)
Codesys V2 (Ethernet)
Codesys V3 (Ethernet)
Emerson RX3i (Ethernet)
IDEC MicroSmart (nur Ethernet)
Kinco SPS (seriell + Ethernet)
Mitsubishi FX (nur Ethernet)
Mitsubishi Q (nur Ethernet)
Modbus Master und Slave (seriell + Ethernet)
Omron (nur Ethernet)
Schneider (nur Ethernet)
Siemens LOGO! (Ethernet)
Siemens S7-200 (nur Ethernet)
Siemens S7-300/400 (nur Ethernet)
Siemens S7-1200/1500 (Ethernet)
Unitronics (nur Ethernet)
Xinje XD/XL (nur Ethernet)

2-wire
3-wire
4-wire

500:1

Environmental cooling (passive)

4 (24 VDC PNP)
6 - 10 (24 VDC PNP, 4 Eingänge können auch als Ausgänge konfiguriert werden)
8 (24 VDC PNP)
9 (24 VDC PNP)
10 - 14 (24 VDC PNP, 4 Eingänge können auch als Ausgänge konfiguriert werden)
11
12 (24 VDC PNP)
14 (24 VDC PNP)
16 (24 VDC PNP)
18 (24 VDC PNP)
22 (24 VDC PNP)
24 (24 VDC PNP)

0
4
6
6 bis 10
8
9
10
10 bis 14
11
12
14
16
20

256.000

CANopen Master
Modbus RTU Master
Modbus RTU Slave
Modbus TCP Master (Client)
Modbus TCP Slave (Server)
freie serielle Kommunikation (ASCII)

mit Gewinde

2 (2 x 100 kHz)
3
4
4 (3 x 200 kHz, 1 x 10 kHz)
4 (4 x 200 kHz)

DIN-Schiene
Einschub (z.B. Schaltschranktür mit Klammern von hinten)
Schraubmontage

Erweiterungskarte
Ethernet
Kinco K5-Erweiterungsbus
Kinco KS-Erweiterungsbus (RJ45)
RS-232
RS-485
USB Host
USB Slave

2018
2020
2021
2022

Federklemme
Schraubklemme

1.500 mA @ 5 V (Versorgung)
< 166 mA @ 5 V
< 172 mA @ 5 V
< 210 mA @ 5 V
< 230 mA @ 5 V

MQTT Consumer
MQTT Producer

OPC UA Client
OPC UA Server

C (Standard C) for macros
Contact Diagram (CD)
Graphical programming software
IEC 61131
Instruction List (IL)
KOP, AWL, C
KOP, SFC; (AWL über Import / Export-Funktion)
Standard C (für eigene Funktionsblöcke)

IP20
IP65 (Front)

24 VDC
230 VAC

noCAN

grüne LED

250 cd/m²
400 cd/m²

480 * 272
800 * 480

4,3" / 11 cm
7" / 18 cm

3
4
keine

-100 bis +500 °C
2-Draht
3-Draht
24 Bit
Cu50
E
J
K
PT100
PT1000
S
Widerstand (roh)

-10 °C bis +55 °C
0 °C bis +55 °C
0 °C bis +60 °C

-20 °C bis +60 °C
-20 °C bis +70 °C

4-Draht resistiv

USB-Kamera

integrierte VPN-Funktion für Fernsteuerung und Fernwartung

no Wifi

nein

Minimum €

–

Maximum €

min. 4/5
min. 3/5
min. 2/5
min. 1/5

Compact PLC

Compact PLCs with an impressive range of functions and a top price/performance ratio. These fully-fledged PLCs are also suitable for complex machine controls and simple process controls thanks to their extensive command library. Compact PLCs combine compact, space-saving design and maximum flexibility thanks to their expandability.

LED push button 19 mm blue

LED pushbutton blue 19 mm maximum IP67 switches up to 5 A / 250 VAC contact configuration: 1NO1NCsuitable for all PLCs

Keine Angabe

Available
Delivery Time : 3 Tage

€8.40*

Serial connection cable (RS-485) for Kinco CV20 frequency converter - open ends

This serial interconnect cable enables Kinco's CV20 frequency inverters to communicate via Modbus RTU in an RS-485 serial bus.Using special Modbus commands the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.

spstiger

Available
Delivery Time : 2-5 days

€12.00*

Serial connection cable (RS-485) for Kinco CV20 frequency converter and Kinco HMI

This serial connection cable enables the Kinco HMI to communicate with Kinco CV20 frequency inverters.Through the HMI, the frequency inverters can be parameterized and controlled with this cable.Using special Modbus commands, the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.

spstiger

Available
Delivery Time : 2-5 days

€18.00*

1 x RS485 interface (COM2) CPU expansion card (left) for Vigor VB PLC (max 50 m)

Vigor

Available

€19.33*

Digitaleingangserweiterung Kinco KB4-4DI für K6 SPS

Digitaleingangserweiterung für Kinco K6 SPS mit 4 x Eingang 24 VDC (PNP) als CPU-Erweiterungskarte

Kinco

Available
Delivery Time : 2-5 days

€20.00*

1 x RS232 interface (COM2) CPU expansion card (left) for Vigor VB PLC

Vigor

Available

€20.17*

TP-LINK WR802N - Nano Router as WLAN adapter for HMI and SPS

TP-Link WR802N WLAN adapter for connecting PLC or HMI with Ethernet port to a WLAN network. After configuration, simply connect the adapter to the Ethernet ports of your PLC or HMI. The adapter then connects as a subscriber to your WLAN network (router), routes the Ethernet connection of your HMI or PLC over the network.

TP-Link

Available

€23.53*

Digitalausgangserweiterung Kinco KB4-4DO für K6 SPS

Digitalausgangserweiterung für Kinco K6 SPS mit 4 x Ausgang 24 VDC (PNP) als CPU-Erweiterungskarte

Kinco

Available
Delivery Time : 2-5 days

€24.00*

Extension cable for Kinco MK series - with 2 x RS-485 socket

With this extension cable, the devices of the MK series from Kinco, a combination device of HMI and PLC can be connected with the extensions. The extensions he Kinco KS-PLC series can be used so easily with the MK series. Internally MK-PLC and extension are connected via a CAN protocol, but this does not need to be programmed, it is sufficient to configure the extensions in the hardware configuration of the PLC in Kinco Builder.On the last extension should be activated via the DIP switches the end resistor.The extension cable is high quality with metal connector on HMI PLC side. In addition, the two RS-485 interfaces of MK-PLC are via a connector with screw contacts. This can be used to connect other Modbus devices or serial devices to MK-PLC.This cable is a service product for easier connection. You can also easily assemble your own cable for the extension. You can find the correct PIN assignment in the product photos.

spstiger

Available
Delivery Time : 2-5 days

€48.00*

Kinco KS121-16DX Digital Input Expansion for KS105 PLC

16 digital input (24 VDC) 1 x RS-485 (Modbus RTU) + expansion port for KS105 This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.

Kinco

Available
Delivery Time : 3 bis 5 Tage

€48.74*

Kinco KS123-14DR Digital Expansion for KS105 PLC

8 Digital input (24 VDC) 6 relay output (230 VAC, 2A) 1 x RS-485 (Modbus RTU) + expansion port for KS105 This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.

Kinco

Available
Delivery Time : 3 bis 5 Tage

€48.74*

Kinco KS122-14DT Digital Expansion for KS105 PLC

14 transistor outputs (24 VDC PNP) 1 x RS-485 (Modbus RTU) + expansion port for KS105 This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.

Kinco

Available
Delivery Time : 3 bis 5 Tage

€48.74*

THINGET I/O extension digital (8 inputs and 8 outputs) as remote I/O with Modbus RTU

Remote I/O extension with 8 digital inputs (24 VDC) and 8 relay outputs of

Xinje

Available

€48.74* €57.00* (14.49% saved)

Communication extension for Xinje XL PLC (serial RS-232/RS-485)

Communication expansion for XL-Compact PLC adds another RS-232 / RS-485 port.Supports Modbus RTU(left side expansion module ED)

Xinje

Available
Delivery Time : 3 bis 5 Tage

€51.26*

16 I/O digital expansion for THINGET XD PLC in various configurations

Eingangs- und Ausgangsvarianten: 16 Eingänge (24 VDC)

Xinje

Available
Delivery Time : 3 bis 5 Tage

€49.58*

Kinco KS122-12XR Digital Output Expansion for KS105 PLC

12 relay output (230 VAC, 2A) 1 x RS-485 (Modbus RTU) + expansion port for KS105 This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.

Kinco

Available
Delivery Time : 3 bis 5 Tage

€53.78*

Digital extension for Xinje XL PLC with 16 I/Os

Eingangs- und Ausgangsvarianten: 16 Ausgänge (Transistor 24 VDC)

Expansion for the Xinje XL series. 8 inputs (PNP) and 8 outputs relays.

Xinje

Available
Delivery Time : 3 bis 5 Tage

€57.14*

Mixed digital expansion Kinco PM523-08DT for K6 PLC

Digital expansion for Kinco K6 PLCTransistor outputs: max. current per channel 0.5 A

Kinco

Available
Delivery Time : 3-4 weeks

€60.40*

Digitalerweiterung Kinco K521-16DX für K6 SPS

Digitalerweiterung für Kinco K6 SPS mit 16 x Eingang 24 VDC (PNP)

Kinco

Available
Delivery Time : 2-5 days

€62.40*

1 x RS485 interface (COM2) CPU expansion module (left) for Vigor VB PLC (max 1000 m)

Vigor

Available

€70.59*

Kinco K2 PLC K205-16DR - 16 I/O (not expandable)

6 digital inputs 24 VDC (PNP) 6 digital outputs relay 4 connectors that can be used as digital input or digital output 24 VDC. 2 x RS-485 (Modbus RTU) You can program the Kinco K2 with the free Kinco-Builder programming software (available as a download a little further down on this page). The micro USB port for programming can supply power to the PLC for programming. Scope of delivery: PLC

Kinco

Available
Delivery Time : 3 bis 5 Tage

€70.59*

Kinco K2 PLC K205-16DT - 16 I/O (not expandable)

6 digital inputs 24 VDC (PNP)6 digital outputs transistor 24 VDC4 connectors that can be used as digital input

Kinco

Available
Delivery Time : 3 bis 5 Tage

€70.59*

Xinje XD3 PLC with 16 I/O (expandable)

Digital outputs: 8 Transistor | Rated voltage (input voltage): 230 VAC

Full-featured, fast expandable PLC from XINJE at a tiger price with 8 inputs and 8 outputs. Versatile feature set for simple control, positioning and regulation tasks. Ideally suited for simple machines, devices and plant controls, also where fast PLC cycles are needed. The PLC is programmed in ladder diagram (LD) or instruction list (IL).

Xinje

Available
Delivery Time : 3 bis 5 Tage

€76.47*

Xinje XL3 PLC with 16 I/O (expandable)

Full-featured, fast expandable and very compact PLC from XINJE at a tiger price with 8 inputs and 8 outputs. Versatile feature set for simple control, positioning and regulation tasks. Ideally suited for simple machines, devices and plant controls, also where fast PLC cycles are needed. The PLC is programmed in ladder diagram (LD) or instruction list (IL).

Xinje

Available
Delivery Time : 3 bis 5 Tage

€76.47*