Kinco Servo Motor SMS60S-0040-30JAK-3LKU - 400 W
No longer available: The Kinco SMS60S-0040-30JAK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS60S-0040-30JAK-3LKU is a servo motor with 400 W rated power for 230 V AC, a 60 mm flange, a 20-bit single-turn encoder, without holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 400 WRated torque: 1.27 N·mRated speed: 3000 min⁻¹Peak torque: 3.81 N·mStall torque: 1.4 N·m
Electrical dataDC link voltage: 300 V DCRated current: 2.4 APeak current: 7.2 AStall current: 2.6 APole pairs: 3Feedback: single-turn encoder, 20 bit
Mechanics and environmentFlange: 60 mm × 60 mmMotor length: 115 mmShaft diameter: 14 mmWeight: 1.6 kgMax. radial force: 180 NMax. axial force: 90 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder)
Cable sets (encoder, motor) were available as a variant in 3, 5, 10 and 15 m.
- No longer available
- Delivery Time : 2 days
Kinco Servo Motor SMS60S-0040-30KAK-3LKU - 400 W (16 Bit Multi-Turn Encoder)
No longer available: The Kinco SMS60S-0040-30KAK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS60S-0040-30KAK-3LKU is a servo motor with 400 W rated power for 230 V AC, a 60 mm flange, a 16-bit multi-turn absolute encoder, without holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 400 WRated torque: 1.27 N·mRated speed: 3000 min⁻¹Peak torque: 3.81 N·mStall torque: 1.4 N·m
Electrical dataDC link voltage: 300 V DCRated current: 2.4 APeak current: 7.2 AStall current: 2.6 APole pairs: 3Feedback: multi-turn absolute encoder, 16 bit
Mechanics and environmentFlange: 60 mm × 60 mmMotor length: 115 mmShaft diameter: 14 mmWeight: 1.6 kgMax. radial force: 180 NMax. axial force: 90 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), ENCDG-(4)-GU-BT (battery cable for the multi-turn encoder, 40 cm)
- No longer available
- Delivery Time : 2 days
Kinco Servo Motor SMS80S-0075-30JAK-3LKU - 750 W
No longer available: The Kinco SMS80S-0075-30JAK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS80S-0075-30JAK-3LKU is a servo motor with 750 W rated power for 230 V AC, a 80 mm flange, a 20-bit single-turn encoder, without holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 750 WRated torque: 2.39 N·mRated speed: 3000 min⁻¹Peak torque: 7.17 N·mStall torque: 2.63 N·m
Electrical dataDC link voltage: 300 V DCRated current: 3.8 APeak current: 11.4 AStall current: 4.2 APole pairs: 3Feedback: single-turn encoder, 20 bit
Mechanics and environmentFlange: 80 mm × 80 mmMotor length: 132 mmShaft diameter: 19 mmWeight: 2.8 kgMax. radial force: 335 NMax. axial force: 167.5 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder)
Cable sets (encoder, motor) were available as a variant in 3, 5, 10 and 15 m.
- No longer available
- Delivery Time : 2 days
Kinco Servo Motor SMS80S-0075-30KAK-3LKU - 750 W (16 Bit Multi-Turn Encoder)
No longer available: The Kinco SMS80S-0075-30KAK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS80S-0075-30KAK-3LKU is a servo motor with 750 W rated power for 230 V AC, a 80 mm flange, a 16-bit multi-turn absolute encoder, without holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 750 WRated torque: 2.39 N·mRated speed: 3000 min⁻¹Peak torque: 7.17 N·mStall torque: 2.63 N·m
Electrical dataDC link voltage: 300 V DCRated current: 3.8 APeak current: 11.4 AStall current: 4.2 APole pairs: 3Feedback: multi-turn absolute encoder, 16 bit
Mechanics and environmentFlange: 80 mm × 80 mmMotor length: 132 mmShaft diameter: 19 mmWeight: 2.8 kgMax. radial force: 335 NMax. axial force: 167.5 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), ENCDG-(4)-GU-BT (battery cable for the multi-turn encoder, 40 cm)
- No longer available
- Delivery Time : 10-15 Tage
Kinco servo motor SMS60S-0040-30JBK-3LKU - 400 W (with brake unit)
No longer available: The Kinco SMS60S-0040-30JBK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS60S-0040-30JBK-3LKU is a servo motor with 400 W rated power for 230 V AC, a 60 mm flange, a 20-bit single-turn encoder, with holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 400 WRated torque: 1.27 N·mRated speed: 3000 min⁻¹Peak torque: 3.81 N·mStall torque: 1.4 N·mBrake holding torque: 1.3 N·m
Electrical dataDC link voltage: 300 V DCRated current: 2.4 APeak current: 7.2 AStall current: 2.6 APole pairs: 3Feedback: single-turn encoder, 20 bitBrake supply: 24 V DC (external)
Mechanics and environmentFlange: 60 mm × 60 mmMotor length: 174 mmShaft diameter: 14 mmWeight: 2.1 kgMax. radial force: 180 NMax. axial force: 90 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), BRA-LL-KL (brake)
Cable sets (encoder, motor, brake) were available as a variant in 3, 5, 10 and 15 m.
- No longer available
- Delivery Time : 2 days
Kinco servo motor SMS60S-0040-30KBK-3LKU - 400 W (with brake unit and 16-bit multi-turn encoder)
No longer available: The Kinco SMS60S-0040-30KBK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS60S-0040-30KBK-3LKU is a servo motor with 400 W rated power for 230 V AC, a 60 mm flange, a 16-bit multi-turn absolute encoder, with holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 400 WRated torque: 1.27 N·mRated speed: 3000 min⁻¹Peak torque: 3.81 N·mStall torque: 1.4 N·mBrake holding torque: 1.3 N·m
Electrical dataDC link voltage: 300 V DCRated current: 2.4 APeak current: 7.2 AStall current: 2.6 APole pairs: 3Feedback: multi-turn absolute encoder, 16 bitBrake supply: 24 V DC (external)
Mechanics and environmentFlange: 60 mm × 60 mmMotor length: 174 mmShaft diameter: 14 mmWeight: 2.1 kgMax. radial force: 180 NMax. axial force: 90 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), BRA-LL-KL (brake), ENCDG-(4)-GU-BT (battery cable for the multi-turn encoder, 40 cm)
- No longer available
- Delivery Time : 10-15 Tage
Kinco Servo Motor SMS80S-0075-30KBK-3LKU - 750 W (with brake unit and 16 bit multi-turn encoder)
No longer available: The Kinco SMS80S-0075-30KBK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS80S-0075-30KBK-3LKU is a servo motor with 750 W rated power for 230 V AC, a 80 mm flange, a 16-bit multi-turn absolute encoder, with holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 750 WRated torque: 2.39 N·mRated speed: 3000 min⁻¹Peak torque: 7.17 N·mStall torque: 2.63 N·mBrake holding torque: 3.2 N·m
Electrical dataDC link voltage: 300 V DCRated current: 3.8 APeak current: 11.4 AStall current: 4.2 APole pairs: 3Feedback: multi-turn absolute encoder, 16 bitBrake supply: 24 V DC (external)
Mechanics and environmentFlange: 80 mm × 80 mmMotor length: 182 mmShaft diameter: 19 mmWeight: 3.5 kgMax. radial force: 335 NMax. axial force: 167.5 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), BRA-LL-KL (brake), ENCDG-(4)-GU-BT (battery cable for the multi-turn encoder, 40 cm)
- No longer available
- Delivery Time : 3-4 weeks
Kinco Servo Motor SMS80S-0075-30JBK-3LKU - 750 W (with brake unit)
No longer available: The Kinco SMS80S-0075-30JBK-3LKU is sold out and can no longer be ordered in the shop. With the SMC and SMK series, Kinco offers new servo motors: SMC and SMK. This page stays online as a reference for existing installations.
The Kinco SMS80S-0075-30JBK-3LKU is a servo motor with 750 W rated power for 230 V AC, a 80 mm flange, a 20-bit single-turn encoder, with holding brake. If you run a machine with an SMS motor and need data or matching cables, you will find them here. It works with the Kinco servo drives CD423 and FD423.
Power and torqueRated power: 750 WRated torque: 2.39 N·mRated speed: 3000 min⁻¹Peak torque: 7.17 N·mStall torque: 2.63 N·mBrake holding torque: 3.2 N·m
Electrical dataDC link voltage: 300 V DCRated current: 3.8 APeak current: 11.4 AStall current: 4.2 APole pairs: 3Feedback: single-turn encoder, 20 bitBrake supply: 24 V DC (external)
Mechanics and environmentFlange: 80 mm × 80 mmMotor length: 182 mmShaft diameter: 19 mmWeight: 3.5 kgMax. radial force: 335 NMax. axial force: 167.5 NDegree of protection: IP65 (housing), IP54 (shaft seal)Insulation class: FCooling: totally enclosed, non-ventilatedAmbient temperature: −20 °C to +40 °CHumidity: < 90 %, non-condensing
Operating modes (in combination with CD423 or FD423)Speed controlTorque controlAbsolute or relative position controlPulse train modeHoming mode
Matching cables (accessories): MOT-005-LL-KL-Y (motor), ENCDG-LL-GU (encoder), BRA-LL-KL (brake)
Cable sets (encoder, motor, brake) were available as a variant in 3, 5, 10 and 15 m.
- No longer available
- Delivery Time : 3-4 weeks