LED push button 19 mm blue
€8.40*
LED pushbutton blue 19 mm maximum IP67 switches up to 5 A / 250 VAC contact configuration: 1NO1NCsuitable for all PLCs
TP-LINK WR802N - Nano Router as WLAN adapter for HMI and SPS
€18.49*
TP-Link WR802N WLAN adapter for connecting PLC or HMI with Ethernet port to a WLAN network. After configuration, simply connect the adapter to the Ethernet ports of your PLC or HMI. The adapter then connects as a subscriber to your WLAN network (router), routes the Ethernet connection of your HMI or PLC over the network.
%
THINGET I/O extension digital (8 inputs and 8 outputs) as remote I/O with Modbus RTU
€48.74*
€57.00*
(14.49% saved)
Remote I/O extension with 8 digital inputs (24 VDC) and 8 relay outputs of
Radio clock receiver (DCF77) for SPS as kit
€82.35*
Radio clock receiver (DCF77) for synchronizing real-time clocks in the PLC with the time signal24 VDC pulses transmit the time signal and can be easily connected to a 24 VDC signal input of a PLC.Supplied with: DCF receiver and circuit board for signal transmission to PLC (24 VDC)A ready-to-use program for synchronizing the real-time clock of the Thinget PLC with the time signal is available free of charge as a download here:
Korenix JetNet 2005 Ethernet 5 Port Industrial Unmanaged DIN Rail Switch
€95.80*
Industrial switch for DIN-rail mountingSimple robust switch ideal for installation in machines and control cabinets
Kinco KS133-06IV Analog extension for KS105 PLC
€104.20*
4 analog inputs (4 - 20 mA, 0 - 10 V), resolution 12 bit, sampling rate 15 Hz2 analog outputs (4 - 20 mA, 0 - 10 V),
%
Tengcon Remote I/O STC-101 Modbus RTU (RS-232, RS-485)
€116.81*
€125.21*
(6.71% saved)
Remote I/O with Modbus RTU (RS-232, RS-485)
16 digital inputs (24 VDC)
Operating temperature: - 20°C - 70°C
One or more of these remote I/O modules can be connected directly via Modbus RTU RS-485 to a Thinget XC PLC (A/B terminals COM2 at the bottom of the PLC) or a Kinco HMI.
It is also possible to combine with PLC, HMI or other devices from other manufacturers.
Kinco GL070E 7" Green Series Widescreen HMI Touch Panel
From
€142.14*
Frontfolie:
Kinco Standard
The GL070E is a modern, versatile and very cost-effective HMI touch panel with 7'' screen diagonal and a resolution of 800 * 480 pixels from Kinco with Ethernet interface. (Note for existing customers: The GL070E is the successor model of the MT4434TE and is compatible in terms of installation dimensions. Programs can be ported).The HMI is programmed using the free Kinco DTools software. You can download it from the bottom of this page. The software is available in German. PLCs, frequency converters and other devices that you want to visualise or control can be connected via Ethernet and serial interface. The touch panel offers you a versatile range of functions and simple graphic configuration of the PLC communication. The touch panel is ideal for machine controls or smaller plant control elements. The unit supports communication with over 60 different PLC models, including Siemens S7-200, S7-1200/1500, S7-300/400, LOGO!, Modbus RTU/TCP (master and slave), Allen Bradley, Thinget, Mitsubishi FX, Beckhoff ADS, BACnet and many others. Functions (excerpt):Versatile graphic elements for display and operationAnimationsIndividual graphic elements and images possibleExtensive data loggingRecipe managementVNC server and client for remote control (e.g. from smartphone or browser)PDF display on the HMI (new)User management and securityAlarms and eventsOwn language switching for users programmable via text tablesC macros for complex calculationsProgramme and recipe download via USB, USB stick or EthernetFTP server for retrieving CSVs and log filesXY graphs with up to 64 characteristics possible, histogramsGeneration and display of QR codesScheduler for calendar-controlled functions...Kinco HMIs are now in use at well over 100 of our customers in Germany.We are convinced that Kinco HMI touch panels also offer you, as an automation or machine and plant manufacturer, a particularly cost-effective way of providing your customers with modern and versatile user interfaces.
Kinco GR070E 7" Green Series Open-Frame HMI Touch Panel
From
€142.14*
The GR070E is a modern, versatile and very cost-effective HMI touch panel with 7'' screen diagonal and a resolution of 800 * 480 pixels from Kinco with Ethernet interface. The GR070E is the open frame version of the GL070E and is well suited for flush mounting in machines and devices.The HMI is programmed via the free Kinco DTools software. You can find this further down on this page as a download. The software is available in German language.
THINGET Temperature measurement extension PT100 as remote I/O with Modbus RTU
€142.50*
6-channel PT100 extension by Thinget with Modbus RTU interface (RS-485).Building rate and station number adjustable via DIP switch, it's
Tengcon Remote I/O SDP-101 Profibus DP
€158.82*
Remote I/O with Profibus DP
16 digital inputs (24 VDC)
Operating temperature: - 20°C - 70°C
Kinco Remote I/O RP2D-1608C1 with 16 inputs 8 transistor outputs and CANopen
€167.23*
Kinco Remote I/O with 16 signal inputs 24 VDC and 8
%
Tengcon Remote I/O STC-1 Modbus RTU (RS-232, RS-485)
€167.23*
€209.24*
(20.08% saved)
Remote I/O with Modbus RTU (RS-232, RS-485)
8 analog inputs (4 - 20 mA)
8 digital inputs (24 VDC)
8 digital outputs (relay, 230 VAC 5A)
Operating temperature: - 20°C to + 70°C
One or more of these remote I/O modules can be connected directly via Modbus RTU RS-485 to a Thinget XC PLC (A/B terminals COM2 at the bottom of the PLC) or a Kinco HMI.
It is also possible to combine with PLC, HMI or other devices from other manufacturers.
Tengcon Remote I/O STC-106 Modbus RTU (RS-232, RS-485)
€209.24*
Remote I/O with Modbus RTU (RS-232, RS-485)
8 temperature inputs (PT100)
Operating temperature: - 20°C - 70°C
2 or 3-wire PT100 elements can be connected. Temperature coefficient and offset can be configured per input.
One or more of these remote I/O modules can be connected directly via Modbus RTU RS-485 to a Thinget XC PLC (A/B terminals COM2 at the bottom of the PLC) or a Kinco HMI.
It is also possible to combine with PLC, HMI or other devices from other manufacturers.
Kinco GR100E 10" Green Series Open-Frame HMI Touch Panel
From
€213.57*
Open frame variant of the GL100E for installation and devices and machines. Modern and versatile and very cost effective HMI touch panel with 10'' screen diagonal and a resolution of 1024 * 600 pixels from Kinco with Ethernet interface..
Through Ethernet and serial interface, you can connect PLC, frequency converter and other devices you want to visualize or control. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 PLC models, including Siemens S7-200, S7-1200, S7-300/400, S7-1500, Modbus RTU/TCP (master and slave), Allen Bradley, Thinget, Mitsubishi FX and many others. For more details, please refer to the "PLC Driver" tab.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you, as an automation or machine and plant manufacturer, to provide your customers with modern and versatile user interfaces.
Kinco GL100E 10" Green Series Widescreen HMI Touch Panel
From
€213.57*
Frontfolie:
Kinco Standard
Modern and versatile and very cost effective HMI touch panel with 10'' screen diagonal and a resolution of 1024 * 600 pixels from Kinco with Ethernet interface. The GL100E is the successor model of the MT4532TE and is compatible in terms of installation dimensions..
Through Ethernet and serial interface, you can connect PLCs, frequency converters and other devices that you want to visualize or control. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 PLC models, including Siemens S7-200, S7-1200, S7-300/400, S7-1500, Modbus RTU/TCP (master and slave), Allen Bradley, Thinget, Mitsubishi FX and many others. For more details, please refer to the "PLC Driver" tab.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
Note for new customers: You can test this device for 30 days without obligation. This device is of course also available for existing customers to order normally at the price shown.This is how the test works for new customers: the first time you order this device, we offer you a 30-day return policy. Within 30 days, you can return this device to us as a first-time buyer. You will not pay the invoice until the trial period is over and you have decided to use the device. To do this, order this device normally, we will automatically ship initial orders as a trial device. If you have any technical questions during the trial, feel free to write to us at support@spstiger.de.
. Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you as an automation or machine and plant manufacturer to provide your customers with modern and versatile operator interfaces.
Kinco GH070E 7" Green Series Widescreen HMI Touch Panel
From
€299.29*
Modern and versatile and very powerful HMI touch panel with 7'' screen diagonal and a resolution of 800 * 480 pixels from Kinco with Ethernet interface. The GH070E is the successor model of the MT4424TE and is compatible with this model in terms of installation dimensions.
Compared to the less expensive GL070E (or its predecessor MT4434TE), this variant has a brighter screen, more serial ports, isolated serial ports and power supply for high noise immunity, and an SD card slot.
Use Ethernet and serial ports to connect PLCs, variable frequency drives, and other devices you want to visualize or control. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 PLC models, including Siemens S7-200, S7-1200, S7-300/400, S7-1500, Modbus RTU/TCP (master and slave), Beckhoff Twincat, Allen Bradley, Thinget, Mitsubishi FX and many others. For more details, please refer to the "PLC Driver" tab.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you, as an automation or machine and plant manufacturer, to provide your customers with modern and versatile user interfaces.
Kinco G100E 10" Green Series Widescreen HMI Touch Panel
From
€306.43*
Modern and versatile and very cost effective HMI touch panel with 10'' screen diagonal and a resolution of 1024 * 600 pixels from Kinco with Ethernet interface. The G100E is the better equipped version of the GL100E and is significantly larger in terms of installation dimensions..
You can connect PLCs, frequency converters and other devices you want to visualize or control via Ethernet and serial interface. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 PLC models, including Siemens S7-200, S7-1200, S7-300/400, S7-1500, Modbus RTU/TCP (master and slave), Allen Bradley, Thinget, Mitsubishi FX and many others. For more details, please refer to the "PLC Driver" tab.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you, as an automation or machine and plant manufacturer, to provide your customers with modern and versatile user interfaces.
Tengcon Remote I/O SDP-106 Profibus DP
€326.89*
Remote I/O with Profibus DP
8 temperature inputs (PT100)
Operating temperature: - 20°C - 70°C
2 or 3-wire PT100 elements can be connected. Temperature coefficient and offset can be configured per input.
Kinco SZ7GES 7" Green Series Widescreen HMI Touch Panel
€335.29*
Cable length:
5 m
Modern and versatile and very cost effective handheld HMI touch panel with 7'' diagonal screen and 800 * 480 pixel resolution from Kinco. The touch panel offers a versatile range of functions and easy graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The HMI can be mounted on a VESA mount for screens (75 mm x 75 mm) for example on a support arm. It is IP62 dust and drip-proof. The serial RS-232 interface and Ethernet can be used to connect PLCs to the HMI. The interfaces are designed as an included 5-meter cable. Optionally, a version with 10-meter cable is available.The signal of the stop button and the yellow button on the back are directly available as an output signal on the cable and are dual-channel. All other function keys can be freely assigned via the programming software. The HMI is programmed via the free software Kinco DTools. You can find it further down on this page as a download. The software is available in German language.
You can connect PLCs, frequency converters and other devices that you want to visualize or control via Ethernet and serial interface. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 different PLC models, including Siemens S7-200, S7-1200/1500, S7-300/400, LOGO!, Modbus RTU/TCP (Master and Slave), Allen Bradley, Thinget, Mitsubishi FX, Beckhoff ADS, BACnet and many others.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
If you have any technical questions during testing, feel free to write us at support@spstiger.de.
Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you, as an automation or machine and plant manufacturer, to provide your customers with modern and versatile operator interfaces.
Kinco GL104E 10" Green Series HMI Touch Panel
From
€355.71*
Modern and versatile HMI touch panel with 10.4'' screen diagonal and a resolution of 800 * 600 pixels from Kinco with Ethernet interface. The GL104E is the successor model of the MT4513TE and is compatible in terms of installation dimensions..
Through Ethernet and serial interface, you can connect PLCs, frequency converters and other devices that you want to visualize or control. The touch panel offers you a versatile range of functions and simple graphical configuration of PLC communication. The touch panel is ideal for machine controls or smaller plant control elements.
The device supports communication with over 60 PLC models, including Siemens S7-200, S7-1200, S7-300/400, S7-1500, Modbus RTU/TCP (master and slave), Allen Bradley, Thinget, Mitsubishi FX and many others. For more details, please refer to the "PLC Driver" tab.
Features (excerpt):
Various graphical elements for display and operation.
Animations
Individual graphic elements and images possible.
Extensive data logging
Recipe management
VNC server and client for remote control (e.g. from smartphone or browser)
PDF display on the HMI (new)
User management and security
Alarms and Events
Individual language switching for users programmable via text tables.
C macros for complex calculations
Program and recipe download via USB, USB stick, or Ethernet
FTP server to retrieve CSVs and log files.
XY graphs with up to 64 characteristics possible, histograms.
Generation and display of QR codes.
Scheduler for calendar controlled functions.
...
Kinco HMI are now in use at well over 100 of our customers in Germany.We are convinced that Kinco's HMI touch panels also open up a particularly cost-effective way for you, as an automation or machine and plant manufacturer, to provide your customers with modern and versatile user interfaces.
Tengcon Remote I/O SDP-100 Profibus DP
€377.31*
Remote I/O with Profibus DP
8 analog inputs (4 - 20 mA; 0 - 5V)
8 digital inputs (24 VDC)
8 digital outputs (relay, 230 VAC 5A)
Operating temperature: - 20°C - 70°C