Do you have questions? Our community may have already answered them!
Connect with others in our support forum.
Eaton Easy200 POW
€37.51*
In stock
Lieferzeit: 3 bis 5 TageFor anyone looking for a compact 24 V power supply for an Eaton easy series control relay – whether for the older easy500/700/800 or for an easyE4 base device – the EASY200-POW is a single-phase switched-mode power supply in a 2-SU DIN-rail housing. The units are primary-cycled and regulated, with SELV output per EN 60950 and radio interference class B per EN 55011/EN 55022.
🏭 Typical applications
Powering small controls: easyE4 in the DC variant, easy500/700/800 or other DIN-rail devices that require up to 0.35 A at 24 V DC.
Sensor supply: 24 V sensors, small actuators or auxiliary circuits in the control cabinet where a compact and particularly slim design (35.5 mm) is required.
Redundant setups: Connect two units in parallel for higher availability or increased power – the outputs are approved for this.
⚡ Key technical data
Input: 100 – 240 V AC, 50/60 Hz, single-phase
Output: 24 V DC at 0.35 A (≈ 8.4 W) and 12 V DC at 0.02 A – both voltages available in parallel
Protection: Overload protection with current limiting, continuous short-circuit proof
LED indication: Green LED signals output voltage present
Galvanic isolation: SELV (Safety Extra-Low Voltage) per EN 60950
🏷️ Manufacturer and standards
The manufacturer is Eaton (Moeller series). The power supply is CE-certified and tested to UL, CSA, EN 50178, EN 55011, EN 55022 and EN 60950 (SELV). It is suitable for use in industrial as well as public low-voltage networks.
🔧 Mounting and scope of delivery
DIN-rail mounting (35 mm per IEC/EN 60715). Screw terminals for 0.2 – 4 mm² solid or 0.2 – 2.5 mm² flexible with ferrule.
Dimensions: 35.5 × 90 × 56.5 mm (W × H × D), weight 0.085 kg, protection IP20.
Note on the product line: EASY200-POW originally belongs to the older easy500/easyPower family and is not part of the easyE4 hardware generation, but can be used as an external 24 V power supply for DC-fed easyE4 base devices. UC and AC variants of the easyE4 do not require an additional power supply.
Technical Specifications
Login