Range of functions
The THINGET XC PLC has a wide range of functions, which are described in detail in the following chapters:
- versatile and generously dimensioned memory areas for various tasks
- Hundreds of timers with resolutions between 100 ms and 1 ms
- hundreds of counters with 16 and 32 bit resolution
- an extensive collection of commands for 16-bit and 32-bit operations
- easy-to-configure PID, sequence control and communication modules
- fast counters and pulse outputs for motion control
- Versatile and easy-to-program communication interfaces
- Standard tools for online debugging
- Programming in ladder diagram, instruction list or C possible
The PLC is therefore well equipped for simple standard tasks at a truly exceptional price/performance ratio. It is not the right choice for high-end applications, but for standard tasks it surprises again and again with its versatility. The Chinese manufacturer has really packed a lot into its product in order to cover the widest possible range of applications.
Suitability for the German market
The THINGET XC series is suitable for the German market in every respect. It is CE-certified, follows the commonly used PNP logic and has a mechanism for mounting on DIN rails. The command set is easy to understand for experienced programmers. ATEX and marine class certification are not available, but in all other standard applications the control units provide excellent service.
Illustration & structure
This is the illustration of a THINGET XC PLC in the version with 32 I/Os. The variants with 60 I/Os are slightly larger, the small XC3 with 14 I/Os is correspondingly smaller. A basic device can be expanded with up to 7 digital and analog modules. CPU expansion cards are also available, which can be used to add a third serial port, for example.
- Power supply input (24V or 220V depending on model) and 24V signal inputs
- Labeling of the inputs
- Interface for expansion boards (e.g. for Ethernet) - please note that the XC3-14 does not have this connection
- COM2 RS232 interface for programming or Modbus RTU communication
- COM1 RS232/485 interface for programming or Modbus RTU communication - Please note that the XC3-14 does not have this connection
- Cover for COM interfaces
- Labeling of the outputs
- Outputs 24V transistor & relay depending on model
- Status LEDs for the outputs
- Interface for expansion modules - please note that the XC3-14 does not have this connection
- Screw-on device (a mounting clip for DIN rails is also available)
- Screw terminals for the inputs and outputs
- Status LEDs for the inputs
- Status LEDs: Power, Run and Error
- Extension cable
- Outputs of an expansion module
- Status LEDs of an expansion module: Power
- Interface for further extension modules - up to 7 extensions are possible
- Power supply input and signal inputs of the extension modules
- Note: The XC3-14 has only one communication interface (5) and is not expandable (3 & 10).