Compact PLC
Compact PLCs with an impressive range of functions and a top price/performance ratio. These fully-fledged PLCs are also suitable for complex machine controls and simple process controls thanks to their extensive command library. Compact PLCs combine compact, space-saving design and maximum flexibility thanks to their expandability.
LED push button 19 mm blue
€8.40*
LED pushbutton blue 19 mm maximum IP67 switches up to 5 A / 250 VAC contact configuration: 1NO1NCsuitable for all PLCs
- Available
- Delivery Time : 3 Tage
Serial connection cable (RS-485) for Kinco CV20 frequency converter - open ends
€12.00*
This serial interconnect cable enables Kinco's CV20 frequency inverters to communicate via Modbus RTU in an RS-485 serial bus.Using special Modbus commands the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.
- Available
- Delivery Time : 2-5 days
Serial connection cable (RS-485) for Kinco CV20 frequency converter and Kinco HMI
€18.00*
This serial connection cable enables the Kinco HMI to communicate with Kinco CV20 frequency inverters.Through the HMI, the frequency inverters can be parameterized and controlled with this cable.Using special Modbus commands, the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.
- Available
- Delivery Time : 2-5 days
TP-LINK WR802N - Nano Router as WLAN adapter for HMI and SPS
€18.49*
TP-Link WR802N WLAN adapter for connecting PLC or HMI with Ethernet port to a WLAN network. After configuration, simply connect the adapter to the Ethernet ports of your PLC or HMI. The adapter then connects as a subscriber to your WLAN network (router), routes the Ethernet connection of your HMI or PLC over the network.
- Available
Extension cable for Kinco MK series - with 2 x RS-485 socket
€48.00*
With this extension cable, the devices of the MK series from Kinco, a combination device of HMI and PLC can be connected with the extensions. The extensions he Kinco KS-PLC series can be used so easily with the MK series. Internally MK-PLC and extension are connected via a CAN protocol, but this does not need to be programmed, it is sufficient to configure the extensions in the hardware configuration of the PLC in Kinco Builder.On the last extension should be activated via the DIP switches the end resistor.The extension cable is high quality with metal connector on HMI PLC side. In addition, the two RS-485 interfaces of MK-PLC are via a connector with screw contacts. This can be used to connect other Modbus devices or serial devices to MK-PLC.This cable is a service product for easier connection. You can also easily assemble your own cable for the extension. You can find the correct PIN assignment in the product photos.
- Available
- Delivery Time : 2-5 days
%
THINGET I/O extension digital (8 inputs and 8 outputs) as remote I/O with Modbus RTU
€48.74*
€57.00*
(14.49% saved)
Remote I/O extension with 8 digital inputs (24 VDC) and 8 relay outputs of
- Available
Kinco KS121-16DX Digital Input Expansion for KS105 PLC
€48.74*
16 digital input (24 VDC)
1 x RS-485 (Modbus RTU) + expansion port for KS105
This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.
- Available
- Delivery Time : 3-5 Tage
Kinco KS123-14DR Digital Expansion for KS105 PLC
€48.74*
8 Digital input (24 VDC)
6 relay output (230 VAC, 2A)
1 x RS-485 (Modbus RTU) + expansion port for KS105
This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.
- Available
- Delivery Time : 3-5 Tage
Kinco KS122-14DT Digital Expansion for KS105 PLC
€48.74*
14 transistor outputs (24 VDC PNP) 1 x RS-485 (Modbus RTU) + expansion port for KS105
This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.
- Available
- Delivery Time : 3-5 Tage
Communication extension for Xinje XL PLC (serial RS-232/RS-485)
€51.26*
Communication expansion for XL-Compact PLC adds another RS-232 / RS-485 port.Supports Modbus RTU(left side expansion module ED)
- Available
- Delivery Time : 3-5 Tage
16 I/O digital expansion for THINGET XD PLC in various configurations
€49.58*
Eingangs- und Ausgangsvarianten:
16 Eingänge (24 VDC)
- Available
- Delivery Time : 3-5 Tage
Kinco KS122-12XR Digital Output Expansion for KS105 PLC
€53.78*
12 relay output (230 VAC, 2A)
1 x RS-485 (Modbus RTU) + expansion port for KS105
This extension is compatible with Kinco KS105 PLC. However, it can also be used independently as a Modbus RTU analog I/O module.
- Available
- Delivery Time : 3-5 Tage
Digital extension for Xinje XL PLC with 16 I/Os
€57.14*
Eingangs- und Ausgangsvarianten:
16 Ausgänge (Transistor 24 VDC)
Expansion for the Xinje XL series. 8 inputs (PNP) and 8 outputs relays.
- Available
- Delivery Time : 3-5 Tage
Mixed digital expansion Kinco PM523-08DT for K6 PLC
€60.40*
Digital expansion for Kinco K6 PLCTransistor outputs: max. current per channel 0.5 A
- Available
- Delivery Time : 3-4 weeks
Kinco K2 PLC K205-16DT - 16 I/O (not expandable)
€70.59*
6 digital inputs 24 VDC (PNP)6 digital outputs transistor 24 VDC4 connectors that can be used as digital input
- Available
- Delivery Time : 3-5 Tage
Xinje XL3 PLC with 16 I/O (expandable)
€76.47*
Full-featured, fast expandable and very compact PLC from XINJE at a tiger price with 8 inputs and 8 outputs. Versatile feature set for simple control, positioning and regulation tasks. Ideally suited for simple machines, devices and plant controls, also where fast PLC cycles are needed. The PLC is programmed in ladder diagram (LD) or instruction list (IL).
- Available
- Delivery Time : 3-5 Tage
Xinje XD3 PLC with 16 I/O (expandable)
€76.47*
Digital outputs:
8 Transistor
|
Rated voltage (input voltage):
230 VAC
Full-featured, fast expandable PLC from XINJE at a tiger price with 8 inputs and 8 outputs. Versatile feature set for simple control, positioning and regulation tasks. Ideally suited for simple machines, devices and plant controls, also where fast PLC cycles are needed. The PLC is programmed in ladder diagram (LD) or instruction list (IL).
- Available
- Delivery Time : 3-5 Tage
Digitalerweiterung Kinco PM523 für K6 SPS
€77.00*
Digitalerweiterung für Kinco K6 SPSTransistorausgänge: max. Strom pro Kanal 0,5 A
- Available
- Delivery Time : 2-5 days
Digitalerweiterung (Relais) Kinco K523-16DR für K6 SPS
€77.00*
Digitalerweiterung für Kinco K6 SPSRelaisausgänge: max. DC30V/AC250V, max. Strom pro Kanal 2 A
- Available
- Delivery Time : 2-5 days
Kinco K2 PLC K205EX-22DT - 22 I/O (extended version)
€81.01*
8 digital inputs 24 VDC (PNP)8 digital outputs transistor 24 VDC6 connectors that can be used as digital input or digital output 24 VDC2 x RS-485
- Available
- Delivery Time : 3-5 Tage
Digitalausgangserweiterung Relais Kinco PM522-16XR für K6 SPS
€82.00*
Digitalerweiterung für Kinco K6 SPSRelaisausgänge: max. DC30V/AC250V, max. Strom pro Kanal 2 A
- Available
- Delivery Time : 2-5 days