Filter
–
Other Kinco SPS
With this extension cable, the devices of the MK series from Kinco, a combination device of HMI and PLC can be connected with the extensions. The extensions he Kinco KS-PLC series can be used so easily with the MK series. Internally MK-PLC and extension are connected via a CAN protocol, but this does not need to be programmed, it is sufficient to configure the extensions in the hardware configuration of the PLC in Kinco Builder.On the last extension should be activated via the DIP switches the end resistor.The extension cable is high quality with metal connector on HMI PLC side. In addition, the two RS-485 interfaces of MK-PLC are via a connector with screw contacts. This can be used to connect other Modbus devices or serial devices to MK-PLC.This cable is a service product for easier connection. You can also easily assemble your own cable for the extension. You can find the correct PIN assignment in the product photos.
- Available
- Delivery Time : 2-5 days
This serial interconnect cable enables Kinco's CV20 frequency inverters to communicate via Modbus RTU in an RS-485 serial bus.Using special Modbus commands the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.
- Available
- Delivery Time : 2-5 days
- Product Benefits 1: CV20 über RS-485 verbinden
- Product Benefits 2: über Modbus RTU ansteuern
14 digital inputs 24 VDC (PNP)
10 digital outputs transistor 24 VDC2 x RS-485 (Modbus RTU)
You can program the Kinco K5 with the free Kinco-Builder programming software (available as a download a little further down this page)..
Scope of delivery: PLC, programming cable serial.
- Available
- Delivery Time : 3-4 weeks
This serial connection cable enables the Kinco HMI to communicate with Kinco CV20 frequency inverters.Through the HMI, the frequency inverters can be parameterized and controlled with this cable.Using special Modbus commands, the frequency inverters can be started and stopped, the direction can be reversed and the frequency can be specified.
- Available
- Delivery Time : 2-5 days
- Product Benefits 1: CV20 und HMI verbinden
- Product Benefits 2: über HMI parametrieren
- Product Benefits 3: über HMI ansteuern
14 digital inputs 24 VDC (PNP)
10 digital outputs transistor 24 VDC
4 analog inputs 4 - 20 mA / 0 - 10 V
2 analog outputs 4 - 20 mA / 0 - 10 V
2 x RS-485 (Modbus RTU)
You can program the Kinco K5 with the free Kinco-Builder programming software (available as a download a little further down on this page).
Scope of delivery: PLC, programming cable serial.
- Available
- Delivery Time : 3-4 weeks